NICE LP21 SINGLE-CHANNEL METAL MASS DETECTOR WITH MAGNETIC LOOP 24V
NICE LP21 single-channel inductive metal mass detector with magnetic loop. Power supply 24v
CABLE NOT INCLUDED
NICE WALKY1024 BDKCE KIT FOR BATTENT CANCELERS 24V WITH ANTA FINO A MAX 1.8 MT
The kit contains:
1x WL1024C - 24V electromechanical motor with integrated power station and OXIBD bidirectional radio receiver included
2x ON2E - Two-channel remote control
1x TS - Signboard
EAN.8032595796893
NICE MC200 GARAGE DOOR AUTOMATION CONTROL UNIT 220V
Enclosure dimensions (mm): 128x112x43 h
Built-in radio card: compatible with Nice FloR and Smilo systems.
Programmable input as step-by-step or open.
Input for connection of an 8.2kOhm resistive safety edge.
Semi-automatic and automatic operation.
Flashing light output.
Phototest or shutter status...
MODEL
Bearing frequency
Estimated flow rate
Cod
Power supply
Battery life
Degree of protection
Dimensions Weight
FLO2:
433,92 Mhz
150/200 with free space antenna
Digital 52 bits
(4.5 million billion combination)
3 Vdc;
lithium stack
type CR2032
3 years (with 10 broadcasts per day)
IP 40
(Use in protected environments)...
Estimated range 15 meters (30 with jumper + 10 cut)
Power supply without jumper 24 Vac/Vdc limits: 18-35 Vdc, 15-28 Vac with jumper 12 Vac/Vdc limits: 10-18 Vdc, 9-15 Vac
Absorption (mA) 25 RX, 30 TX
Maximum absorbed current: about 55 mA (TX + RX)
Angle of the beam emitted by the TX: 20° (± 25%)
Angle of the detection area of the RX: about 20°, without...
NICE TOONA KIT 5024 BD AUTOMATION FOR TWO-LEAF SWING GATES UP TO 5M PER LEAF 24V
Kit includes:
2 x 24V TO5024 electromechanical operators
1 x MC824H electronic control unit
2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 OXIDB 433MHz plug-in receiver
1 ‘automatic gate’ warning sign
Manuals and safety...
NICE SPARE NUT + NUT ASSEMBLY FOR WINGO WG2024 WG4024 WINGO4024 PRTO06C
APPLICATION
NICE WINGO WG2024 swing door motor
NICE WINGO WG4024 swing door motor
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 5MT RACK KG RB400BDKCE-5MT
KIT COMPOSED OF:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL PLUG-IN RECEIVER
1 ELDC LED FLASHING LIGHT WITH INTEGRATED ANTENNA
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL...
NICE ERA ELDC LED FLASHING LIGHT 12-36 Vdc WITH INTEGRATED ANTENNA
NICE ERA series flashing light, model ELDC 12-36v
NEUTRAL, LED LIGHT, 12-36 Vdc, FOR SUITABLE CONTROL UNITS
Integrated antenna 433.92 MHz
IP44 protection
Compatible with:
A924, MC824H, MC424L, WALKY, HYKE, ROAD, ROBUS, RUN, NAKED SLIDING 400, SPIN / SPINBUS, TEN, SOON, S/M/L BAR, WIDE
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 4MT RACK KG RB400BDKCE-4MT
KIT COMPOSED OF:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL PLUG-IN RECEIVER
1 ELDC LED FLASHING LIGHT WITH INTEGRATED ANTENNA
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL...
NICE POA3/A ELECTRONIC CONTROL UNIT REPLACEMENT FOR HOPP SERIES ARTICULATED SWING GATE MOTOR
REPLACEMENT CONTROL UNIT
compatible with HO7124 and HO7224 motors
Replace your Nice motor board with SPPOA3R10
POA3/A
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE REPLACEMENT ASSEMBLED ELECTRIC MOTOR GROUP FOR WINGO WG5000 WG4000 230V WGA05
Assembled 220V WINGO electric motor
APPLICATION
Nice Wingo 5000 (WINGO5KCE)
Nice Wingo (WINGO 4000) (WINGOKCE)ING
Nice Wingo L (WG4010)
NICE POA3 CONTROL UNIT REPLACEMENT FOR HO7124 AND HO7224 OPERA MOTORS
Compatibility: NICE HO7124 and HO7224 motors
High reliability: Designed to ensure optimal and long-lasting performance
Easy installation: Quick replacement without the need for system modifications
Overload protection: High-quality components for greater safety
Package contents:
POA3...
NICE MCA5 FOR MC800 REPLACEMENT CONTROL UNIT FOR SWING GATES 220V SPMCA5
Replacement control unit for 220V swing gate motors (1 OR 2 MOTORS)
Model: MCA5
Compatibility: Designed as a replacement for the MC800 control panel for NICE gate automation.
Generation: This is the new generation of the Cent. MCA5 board, designed specifically for the MC800 model.
NICE MC200 GARAGE DOOR AUTOMATION CONTROL UNIT 220V WITH 2 REMOTE CONTROLS
KIT CONSISTS OF:
1 NICE MC200 CONTROL UNIT
2 NICE 2-CHANNEL REMOTE CONTROLS 433.92 MHz ROLLING CODE BLACK INTI2
Enclosure dimensions (mm): 128x112x43 h
Built-in radio card: compatible with Nice FloR and Smilo systems.
Programmable input as step-by-step or open.
Input for connection...
NICE PAIR OF WIRELESS BATTERY-OPERATED WALL-MOUNTED PHOTOCELLS BLUEBUS EPMOW
Features:
- Range: 20 meters
- Output power: 3 V DC, with CR123 lithium battery
- Adjustment: approximately 10° along the vertical axis
- Protection rating: IP44
- Dimensions: 50 x 40 x 105 mm
Reflective technology (EPMOR) allows you to wire
only the main photocell and not the...
NICE TOONA TO7024 SINGLE-WING KIT FOR SWING GATE AUTOMATION UP TO 7M/WING 24V
Kit includes:
1 x TO4024 24V electromechanical operator
1 x MC824H electronic control unit
2 x MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 433MHz OXIDB plug-in receiver
Manuals and safety certificates included in the box
24-MONTH...
NICE MYGO4 4-CHANNEL REMOTE CONTROL TRANSMITTER, BLACK, 433.92 MHz
4-channel model
Operating frequency: 433.92 MHz
3Vdc power supply with CR2032 battery
Rolling code security system (Nice O-CODE) to prevent cloning with parts from other, non-original transmitters.
IP30 protection rating
NICE PS324 BUFFER BATTERY GROUP 24V POWER SUPPLY WITH BATTERY CHARGER
Features
24V battery with integrated battery charger (for motors in the 24 Vdc version)
The battery kit consists of 2 12 Volt batteries in series to produce 24 Volts and a charger card.
This battery block is integrated into the control logic box MC824H MC424L MCA2 MCA1 in the Hyppo...
NICE RBA3 REPLACEMENT CONTROL CENTRAL BOARD FOR ROBUS 400 600 1000 1000P AND RUN 1500
REPLACEMENT CONTROL CENTRAL BOARD FOR NICE ROBUS AND NICE RUN MODELS
RB400, RB600 RB600P, RB1000 RB1000P
RUN1500 RUN1500P
NICE MC800 CONTROL UNIT FOR 230V SWING DOOR AUTOMATION
COMPATIBLE WITH:
Nice Toona TO4005, TO4006, TO4015, TO4605, TO5015, TO5016, TO5605.
Nice Hyppo HY7100, HY7005.
Nice Wingo WG4000, WG4010, WG5000.
Nice Too TOO3000, TOO4500.
Nice Metro MFAB3000, MFAB3000L
Nice Big Metro LFAB4000
Nice MC800 control unit
For one or two 230 V gate motors
With OX plug-in...
CHARACTERISTICS
CODE
WG4024
ELECTRICAL DATA
ALIMENTATION (VDC)
24
(A)
3.5
POWER (W)
85
PRESTAZIONAL DATA
(M/S)
0.018
FORZA (N)
1500
WORK CYCLE (CICLI/ORA)
30
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
770x98x95 h
PESO (KG)...
NICE HKA2 CONTROL UNIT REPLACEMENT HYKE 7024 7024HS SWING GATES SPHKA2R10
Original replacement control board HKA2 for HYKE articulated arm motor series.
Compatible with the following models: HK7024HSR10 - HK7024R10.
Application:
HYKE 7024 (HK7024), HYKE 7024 R10, HYKE 7024HS R10
NICE TOONA MOTOR ATTUATORE ELETTOMECCANICO 24V CON ENCODER PER ANTE BATTENTI LUNGHEZZA MAX 7 METRI T7024
Features:
- Typology: electric motor for gates or gates before battenti;
- Power: 24Vdc;
- Maximum absorption: 5A;
- Nominal absorption: 2.5A;
- Maximum assorbite power: 120W;
- Nominal power absorption: 60W;
- Protection grade: IP44;
- Corsican: 584...
NICE REPLACEMENT TRANSFORMER GROUP FOR MC424 CONTROL UNIT PRMC42401
Main features:
Compatible with MC424 control units
Input voltage: 230V AC
Output voltage: 24V AC
Protection against overvoltage and overheating
Quick and easy installation
Stable and long-lasting operation
Technical specifications:
Power supply: 230V input, 24V output
Colour: Black...
NICE 24V EMERGENCY BATTERY KIT WITH INTEGRATED CHARGER PS124
24V battery with integrated charger. The kit is integrated into the engine block and connects to the control unit using the supplied cable.
The kit consists of two 12V batteries connected in series to generate 24V and a charging plate.
This battery pack is integrated into the MC424 control...
NICE MC824H CONTROL UNIT FOR BETTENTE GATE WITH BLUEBUS TECHNOLOGY ENCODER
Pre-flashing time tpre (s) 0: 10 Force adjustment (%)
Obstacle detection (sensitivity) Min ÷ max
Force adjustment (%) -
Obstacle detection (sensitivity) min ÷ max
Container dimensions (mm) 230x120x300 h
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
NICE REPLACEMENT LOCK RELEASE GROUP FOR ROBUS AND RUN PRRB06A MOTORS
APPLICATION
ROBUS: RB400, RB1000, RB600, RB600P, RB250HS, RB1000P, RB500HS, RB500HS R10, RB1000 R10, RB400 R10, RB600 R10, RB250HS R10
ROX: ROX600, ROX1000, ROX600 R10, ROX1000 R10
RUN: RUN 400HS, RUN 1200HS, RUN 1500, RUN 1800, RUN 2500, RUN 2500I, RUN 1500 R10
