Detector of monochannel metal masses. Inductive magnetic coil, Power supply 24 V
The Inductive Spire Detector is a system used for vehicle detection and pass control in the presence of automated garage gates and doors, barrier systems and parking management.
Easy to use: Programming and use even more intuitive thanks to the simple management of functions via DIP Switch.
The parameter setting can be set directly by the user on the device: for example, the detection sensitivity of loop detectors can be adjusted up to 4 different levels to adapt to different installation needs
With the LP22 detector it is also possible to determine the transit sense of vehicles over the magnetic coils
Diagnostics: Inductive detectors are now equipped with a "RESET" front key to quickly restore factory functions if necessary
The presence of LEDs on board the detectors ensures a continuous diagnostic function
Performance: The detector is able to periodically calibrate the essential parameters for proper operation of the system
Fast response times (12 ms)
Reduced consumption of 0.5 W in standard usage condition
NICE PAIR OF WIRELESS BATTERY-OPERATED WALL-MOUNTED PHOTOCELLS BLUEBUS EPMOW
Features:
- Range: 20 meters
- Output power: 3 V DC, with CR123 lithium battery
- Adjustment: approximately 10° along the vertical axis
- Protection rating: IP44
- Dimensions: 50 x 40 x 105 mm
Reflective technology (EPMOR) allows you to wire
only the main photocell and not the...
NICE HKA2 CONTROL UNIT REPLACEMENT HYKE 7024 7024HS SWING GATES SPHKA2R10
Original replacement control board HKA2 for HYKE articulated arm motor series.
Compatible with the following models: HK7024HSR10 - HK7024R10.
Application:
HYKE 7024 (HK7024), HYKE 7024 R10, HYKE 7024HS R10
NICE MCA1 REPLACEMENT CONTROL BOARD 24V FOR MC824H SPMCA1R10
Compatibility: NICE MC824H control unit
Power supply: 24V DC for 2 swing gate motors
BlueBUS technology for quick and secure connections
Emergency battery management for operation in the event of a power outage
Advanced control with speed adjustment and obstacle detection
Easy installation...
NICE EPMB EXTERNAL PHOTOCELL COPY FOR CONNECTION BY BLUEBUS
TECHNICAL FEATURES:
Estimated flow rate (m): up to 15 for maximum TX-RX dissolution ± 5 (the device can signal an obstacle even in adverse weather conditions)
Power supply: the device can only be connected to “BlueBUS” networks from which it takes power supply and sends output signals
Photocell...
NICE SPARE NUT + NUT ASSEMBLY FOR WINGO WG2024 WG4024 WINGO4024 PRTO06C
APPLICATION
NICE WINGO WG2024 swing door motor
NICE WINGO WG4024 swing door motor
NICE WM001G NICEWAY RADIO CONTROL UP DOWN STOP AWNINGS AND ROLLER SHUTTERS
Remote control for awnings, roller shutters and rolling shutters with Nice Way motorization model WM001G with up, down and stop function, 433.92 Mhz in rolling code mode. It is programmed in self-learning on the radio receiver.
TECHNICAL CHARACTERISTICS
Carrier frequency: 433.92...
NICE TOONA TO7024 SINGLE-WING KIT FOR SWING GATE AUTOMATION UP TO 7M/WING 24V
Kit includes:
1 x TO4024 24V electromechanical operator
1 x MC824H electronic control unit
2 x MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 433MHz OXIDB plug-in receiver
Manuals and safety certificates included in the box
24-MONTH...
NICE TOONA KIT 7024 BD AUTOMATION FOR TWO-LEAF SWING GATES UP TO 7M PER LEAF 24V
Kit includes:
2 x TO7024 24V electromechanical operators
1 x MC824H electronic control unit
2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 OXIDB 433MHz plug-in receiver
1 ‘automatic gate’ warning sign
Manuals and safety...
NICE MC800 CONTROL UNIT FOR 230V SWING DOOR AUTOMATION
COMPATIBLE WITH:
Nice Toona TO4005, TO4006, TO4015, TO4605, TO5015, TO5016, TO5605.
Nice Hyppo HY7100, HY7005.
Nice Wingo WG4000, WG4010, WG5000.
Nice Too TOO3000, TOO4500.
Nice Metro MFAB3000, MFAB3000L
Nice Big Metro LFAB4000
Nice MC800 control unit
For one or two 230 V gate motors
With OX plug-in...
NICE OXIBD BIDIREKTIONALER PLUG-IN-RECEIVER MIT OPERA-SYSTEM-FUNKTIONEN
OXIBD ist mit allen Nice-Steuergeräten kompatibel, die über einen SM-Anschluss verfügen, sodass auch bereits vorhandene Nice-Automatisierungen bidirektional betrieben werden können.
Ergonomisches Design: bequeme und praktische Position zur Verwendung der Antennenanschlüsse, der Taste...
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
KIT COPOSTA DA:
1 RB400 IRREVERSIBLE ELECTROMECANIC MOTOR WITH CENTRAL RBA3 INCORPORATA.
1 RESEARCH IN BIDIREZIONAL OXIBD
1 LED LAMP LAMP WITH INTEGRATED ELDC ANTENNA
1 COPPY OF FOTOCELLULE BUS EPM SINCRONIZED
2 TRASMETTI 2 CANALI 433 MHZ BIDIREZIONAL ON2BD
6MT CREMAGLIERA IN ACCIDENT PLASTIC
1 SEGNAL TABLE
Brand: NICE
Reference RB400KCE
EAN.8032595795032
Estimated range 15 meters (30 with jumper + 10 cut)
Power supply without jumper 24 Vac/Vdc limits: 18-35 Vdc, 15-28 Vac with jumper 12 Vac/Vdc limits: 10-18 Vdc, 9-15 Vac
Absorption (mA) 25 RX, 30 TX
Maximum absorbed current: about 55 mA (TX + RX)
Angle of the beam emitted by the TX: 20° (± 25%)
Angle of the detection area of the RX: about 20°, without...
NICE REPLACEMENT TRANSFORMER GROUP FOR MC424 CONTROL UNIT PRMC42401
Main features:
Compatible with MC424 control units
Input voltage: 230V AC
Output voltage: 24V AC
Protection against overvoltage and overheating
Quick and easy installation
Stable and long-lasting operation
Technical specifications:
Power supply: 230V input, 24V output
Colour: Black...
NICE MC824H CONTROL UNIT FOR BETTENTE GATE WITH BLUEBUS TECHNOLOGY ENCODER
Pre-flashing time tpre (s) 0: 10 Force adjustment (%)
Obstacle detection (sensitivity) Min ÷ max
Force adjustment (%) -
Obstacle detection (sensitivity) min ÷ max
Container dimensions (mm) 230x120x300 h
NICE REPLACEMENT ASSEMBLED ELECTRIC MOTOR GROUP FOR WINGO WG5000 WG4000 230V WGA05
Assembled 220V WINGO electric motor
APPLICATION
Nice Wingo 5000 (WINGO5KCE)
Nice Wingo (WINGO 4000) (WINGOKCE)ING
Nice Wingo L (WG4010)
NICE MYGO4 4-CHANNEL REMOTE CONTROL TRANSMITTER, BLACK, 433.92 MHz
4-channel model
Operating frequency: 433.92 MHz
3Vdc power supply with CR2032 battery
Rolling code security system (Nice O-CODE) to prevent cloning with parts from other, non-original transmitters.
IP30 protection rating
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE MC200 GARAGE DOOR AUTOMATION CONTROL UNIT 220V WITH 2 REMOTE CONTROLS
KIT CONSISTS OF:
1 NICE MC200 CONTROL UNIT
2 NICE 2-CHANNEL REMOTE CONTROLS 433.92 MHz ROLLING CODE BLACK INTI2
Enclosure dimensions (mm): 128x112x43 h
Built-in radio card: compatible with Nice FloR and Smilo systems.
Programmable input as step-by-step or open.
Input for connection...
SYKCE SLEMYO ALIMENT KIT FOR AUTHORIZATION 24VIL KIT CONTIENE
N°1 Photovoltaic solar panel for 24V power supply with maximum power 15W.
N°1 PSY24 Box battery 24V control circuit and transport handles. It keeps the electrical energy produced by the SYP panel continuously and permanently delivering it throughout the day.
Technical characteristics
Voltage...
NICE PS324 BUFFER BATTERY GROUP 24V POWER SUPPLY WITH BATTERY CHARGER
Features
24V battery with integrated battery charger (for motors in the 24 Vdc version)
The battery kit consists of 2 12 Volt batteries in series to produce 24 Volts and a charger card.
This battery block is integrated into the control logic box MC824H MC424L MCA2 MCA1 in the Hyppo...
NICE POA3/A ELECTRONIC CONTROL UNIT REPLACEMENT FOR HOPP SERIES ARTICULATED SWING GATE MOTOR
REPLACEMENT CONTROL UNIT
compatible with HO7124 and HO7224 motors
Replace your Nice motor board with SPPOA3R10
POA3/A
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4 MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
MODEL
Bearing frequency
Estimated flow rate
Cod
Power supply
Battery life
Degree of protection
Dimensions Weight
FLO2:
433,92 Mhz
150/200 with free space antenna
Digital 52 bits
(4.5 million billion combination)
3 Vdc;
lithium stack
type CR2032
3 years (with 10 broadcasts per day)
IP 40
(Use in protected environments)...
NICE TOONA MOTOR ATTUATORE ELETTOMECCANICO 24V CON ENCODER PER ANTE BATTENTI LUNGHEZZA MAX 7 METRI T7024
Features:
- Typology: electric motor for gates or gates before battenti;
- Power: 24Vdc;
- Maximum absorption: 5A;
- Nominal absorption: 2.5A;
- Maximum assorbite power: 120W;
- Nominal power absorption: 60W;
- Protection grade: IP44;
- Corsican: 584...
NICE TOONA 24V ELECTROMECHANICAL ACTUATOR MOTOR WITH ENCODER FOR SWING GATES MAX LENGTH 5 METERS TO5024
Compatible with MOBY MB5024
Compatible with PLUTO PL5024, (replacing the brackets) no longer in production.
NICE ELECTRIC MOTOR RONDO RN2040 FOR ROLLING SHUTTERS GARAGE WITH BRAKE
Type: Motor for spring-loaded rolling shutters
Power supply 230Va
Maximum absorption (A) 2.7
Maximum torque (Nm) 170
Maximum absorbed power (W) 630
Maximum speed (Rpm) 10
Protection degree (IP) 20
Maximum shutter height (m) 7
Lift (kg) 170
Dimensions (mm) Ø200 x 350
Emergency power...
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 KG RB400BDKCE
KIT COMPRISING:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1...
THE RB600BDKCE/MT6 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
6 MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
NICE RBA3 REPLACEMENT CONTROL CENTRAL BOARD FOR ROBUS 400 600 1000 1000P AND RUN 1500
REPLACEMENT CONTROL CENTRAL BOARD FOR NICE ROBUS AND NICE RUN MODELS
RB400, RB600 RB600P, RB1000 RB1000P
RUN1500 RUN1500P
€169.90
Last items in stock
NICE LP21 SINGLE-CHANNEL METAL MASS DETECTOR WITH MAGNETIC LOOP 24V
NICE LP21 single-channel inductive metal mass detector with magnetic loop. Power supply 24v
