Kit with 24V electromechanical motor.Integrated magnetic encoder for antifouling and reverse functions in case of obstacle according to regulatory parameters.Maximum weight 1000 kg.
BiDirezionale Nice products report the status of the automation and the reception of the command.
Yubii is the new Nice ecosystem that connects all the automations of the house.
THE KIT RB1000KCE 24V CONTIENE:
1 RB1000 IRREVERSIBLE ELECTROMECCAN MURDER WITH CENTRAL RBA3 INCORPORATA.
1 RESEARCH IN BIDIREZIONAL OXIBD
1 LED LAMP WITH INTEGRATED ELDC ANTENNA
1 COPPY OF FOTOCELLULE BUS EPMB
2 TRASMETTI 3 CANALI 433 MHZ BIDIREZIONAL ON3BD
1 SEGNALETIC TABLE
Simple: thanks to the BlueBUS system that allows connections to only two wires between the control unit and up to 7 pairs of photocells, control devices, security and signaling.
Practical: pS124 (optional) control unit and buffer batteries housed in Robus, which can be connected via a convenient guided coupling connector.
Evolved: RB1000 is equipped with a temperature sensor that adapts the engine force to weather conditions while adapting thermal protection at the same time.A master/slave selection automatically syncs 2 engines, allowing automation of two-door sliding gates.
Smart: thanks to the obstacle detection and automatic programming of working time.Autodiagnosis with signaling through the flashing.8 programming levels.
Sure adjustable acceleration and deceleration, at the beginning and end of each manoeuvre.
Robust: aluminum base and unlocking with easy opening handle.Silent: gear motor on bearings.
NICE HKA2 CONTROL UNIT REPLACEMENT HYKE 7024 7024HS SWING GATES SPHKA2R10
Original replacement control board HKA2 for HYKE articulated arm motor series.
Compatible with the following models: HK7024HSR10 - HK7024R10.
Application:
HYKE 7024 (HK7024), HYKE 7024 R10, HYKE 7024HS R10
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 KG RB400BDKCE
KIT COMPRISING:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1...
NICE TOONA TO5024 SINGLE-WING KIT FOR AUTOMATING SWING GATES UP TO 5M/WING 24V
Kit includes:
1 x TO5024 24V electromechanical operator
1 x MC824H electronic control unit
No. 2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 433MHz OXIDB plug-in receiver
Manuals and safety certificates included in the box
24-MONTH...
THE KIT RB600KCE 24V CONTIENE:
1 RB600 IRREVERSIBLE ELECTROMECANIC MOTOR WITH CENTRAL RBA3 INCORPORATA.
1 RESEARCH IN BIDIREZIONAL OXIBD
1 LED LAMP LAMP WITH INTEGRATED ELDC ANTENNA
1 COPPY OF FOTOCELLULE BUS EPMB
2 TRASMETTI 2 CANALI 433 MHZ BIDIREZIONAL ON2BD
1 SEGNAL TABLE
EAN.8032595795063
NICE TOONA MOTOR ATTUATORE ELETTOMECCANICO 24V CON ENCODER PER ANTE BATTENTI LUNGHEZZA MAX 7 METRI T7024
Features:
- Typology: electric motor for gates or gates before battenti;
- Power: 24Vdc;
- Maximum absorption: 5A;
- Nominal absorption: 2.5A;
- Maximum assorbite power: 120W;
- Nominal power absorption: 60W;
- Protection grade: IP44;
- Corsican: 584...
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 5MT RACK KG RB400BDKCE-5MT
KIT COMPOSED OF:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL PLUG-IN RECEIVER
1 ELDC LED FLASHING LIGHT WITH INTEGRATED ANTENNA
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL...
NICE REPLACEMENT LOCK RELEASE GROUP FOR ROBUS AND RUN PRRB06A MOTORS
APPLICATION
ROBUS: RB400, RB1000, RB600, RB600P, RB250HS, RB1000P, RB500HS, RB500HS R10, RB1000 R10, RB400 R10, RB600 R10, RB250HS R10
ROX: ROX600, ROX1000, ROX600 R10, ROX1000 R10
RUN: RUN 400HS, RUN 1200HS, RUN 1500, RUN 1800, RUN 2500, RUN 2500I, RUN 1500 R10
NICE RUN 1500 MOTOR REDUCER FOR AUTHORIZATION EXPERIENCES 1500KG 24V
Features:
- Power supply: 230V 50/60Hz
- Absorption: 2
- Power: 400W
- Speed: 0.25 m/s
- Come on
- Working cycle: 60 cycles now
- Degree of protection: IP44
- Operating temperature: -20 ÷ +50 °C
- Size: 400 x 255 x 390 mm
- Weight: 19 kg
EAN.8032595796305
THE RB600BDKCE/MT6 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
6 MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
NICE MC800 CONTROL UNIT FOR 230V SWING DOOR AUTOMATION
COMPATIBLE WITH:
Nice Toona TO4005, TO4006, TO4015, TO4605, TO5015, TO5016, TO5605.
Nice Hyppo HY7100, HY7005.
Nice Wingo WG4000, WG4010, WG5000.
Nice Too TOO3000, TOO4500.
Nice Metro MFAB3000, MFAB3000L
Nice Big Metro LFAB4000
Nice MC800 control unit
For one or two 230 V gate motors
With OX plug-in...
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE WM001G NICEWAY RADIO CONTROL UP DOWN STOP AWNINGS AND ROLLER SHUTTERS
Remote control for awnings, roller shutters and rolling shutters with Nice Way motorization model WM001G with up, down and stop function, 433.92 Mhz in rolling code mode. It is programmed in self-learning on the radio receiver.
TECHNICAL CHARACTERISTICS
Carrier frequency: 433.92...
NICE HYKE COMPLETE KIT FOR AUTOMATION OF SWINGING GATES WITH ARTICULATED ARM UP TO 3.5 MT 24V HYKEBDKCE
Articulated arm motors for external mounting ideal for large pillars. Bidirectional technology.
Kit including:
No. 1 electromechanical operator 24v HK7024 with integrated control unit
No. 1 electromechanical operator 24v HK7224
No. 2 dual-channel...
NICE 24V EMERGENCY BATTERY KIT WITH INTEGRATED CHARGER PS124
24V battery with integrated charger. The kit is integrated into the engine block and connects to the control unit using the supplied cable.
The kit consists of two 12V batteries connected in series to generate 24V and a charging plate.
This battery pack is integrated into the MC424 control...
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
CENTRAL MC424L COMMUNITY SCHEDA WITH BOX FOR MOTOR WINGO 24V
Control unit with integrated receiver for one or two 24 V engines without encoder, designed for Solemyo
TECHNICAL FEATURES:
Network power supply (Vac 50/60 Hz): 230 10%
Battery power (Vdc): 21 28
Max motor power and current (VA; A): 75; 3
Max service current 24 V (A): 0.2 +0,1
Voltage and max...
NICE ELECTRIC MOTOR RONDO RN2040 FOR ROLLING SHUTTERS GARAGE WITH BRAKE
Type: Motor for spring-loaded rolling shutters
Power supply 230Va
Maximum absorption (A) 2.7
Maximum torque (Nm) 170
Maximum absorbed power (W) 630
Maximum speed (Rpm) 10
Protection degree (IP) 20
Maximum shutter height (m) 7
Lift (kg) 170
Dimensions (mm) Ø200 x 350
Emergency power...
NICE REPLACEMENT TRANSFORMER GROUP FOR MC424 CONTROL UNIT PRMC42401
Main features:
Compatible with MC424 control units
Input voltage: 230V AC
Output voltage: 24V AC
Protection against overvoltage and overheating
Quick and easy installation
Stable and long-lasting operation
Technical specifications:
Power supply: 230V input, 24V output
Colour: Black...
NICE TOONA KIT 7024 BD AUTOMATION FOR TWO-LEAF SWING GATES UP TO 7M PER LEAF 24V
Kit includes:
2 x TO7024 24V electromechanical operators
1 x MC824H electronic control unit
2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 OXIDB 433MHz plug-in receiver
1 ‘automatic gate’ warning sign
Manuals and safety...
KIT COPOSTA DA:
1 RB400 IRREVERSIBLE ELECTROMECANIC MOTOR WITH CENTRAL RBA3 INCORPORATA.
1 RESEARCH IN BIDIREZIONAL OXIBD
1 LED LAMP LAMP WITH INTEGRATED ELDC ANTENNA
1 COPPY OF FOTOCELLULE BUS EPM SINCRONIZED
2 TRASMETTI 2 CANALI 433 MHZ BIDIREZIONAL ON2BD
6MT CREMAGLIERA IN ACCIDENT PLASTIC
1 SEGNAL TABLE
Brand: NICE
Reference RB400KCE
EAN.8032595795032
NICE PS324 BUFFER BATTERY GROUP 24V POWER SUPPLY WITH BATTERY CHARGER
Features
24V battery with integrated battery charger (for motors in the 24 Vdc version)
The battery kit consists of 2 12 Volt batteries in series to produce 24 Volts and a charger card.
This battery block is integrated into the control logic box MC824H MC424L MCA2 MCA1 in the Hyppo...
NICE ERA ELDC LED FLASHING LIGHT 12-36 Vdc WITH INTEGRATED ANTENNA
NICE ERA series flashing light, model ELDC 12-36v
NEUTRAL, LED LIGHT, 12-36 Vdc, FOR SUITABLE CONTROL UNITS
Integrated antenna 433.92 MHz
IP44 protection
Compatible with:
A924, MC824H, MC424L, WALKY, HYKE, ROAD, ROBUS, RUN, NAKED SLIDING 400, SPIN / SPINBUS, TEN, SOON, S/M/L BAR, WIDE
NICE SPARE NUT + NUT ASSEMBLY FOR WINGO WG2024 WG4024 WINGO4024 PRTO06C
APPLICATION
NICE WINGO WG2024 swing door motor
NICE WINGO WG4024 swing door motor
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4 MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
NICE MC200 GARAGE DOOR AUTOMATION CONTROL UNIT 220V WITH 2 REMOTE CONTROLS
KIT CONSISTS OF:
1 NICE MC200 CONTROL UNIT
2 NICE 2-CHANNEL REMOTE CONTROLS 433.92 MHz ROLLING CODE BLACK INTI2
Enclosure dimensions (mm): 128x112x43 h
Built-in radio card: compatible with Nice FloR and Smilo systems.
Programmable input as step-by-step or open.
Input for connection...
NICE LP21 SINGLE-CHANNEL METAL MASS DETECTOR WITH MAGNETIC LOOP 24V
NICE LP21 single-channel inductive metal mass detector with magnetic loop. Power supply 24v
CABLE NOT INCLUDED
Technical characteristics
Power supply:Via Bluebus
Absorption:1.5 BlueBus unit
Degree of protection (IP): 44
Dimensions (mm): 70x27x70 h
Weight (g): 200
CHARACTERISTICS
CODE
WG4024
ELECTRICAL DATA
ALIMENTATION (VDC)
24
(A)
3.5
POWER (W)
85
PRESTAZIONAL DATA
(M/S)
0.018
FORZA (N)
1500
WORK CYCLE (CICLI/ORA)
30
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
770x98x95 h
PESO (KG)...
NICE REPLACEMENT ASSEMBLED ELECTRIC MOTOR GROUP FOR WINGO WG5000 WG4000 230V WGA05
Assembled 220V WINGO electric motor
APPLICATION
Nice Wingo 5000 (WINGO5KCE)
Nice Wingo (WINGO 4000) (WINGOKCE)ING
Nice Wingo L (WG4010)
NICE TOONA 24V ELECTROMECHANICAL ACTUATOR MOTOR WITH ENCODER FOR SWING GATES MAX LENGTH 5 METERS TO5024
Compatible with MOBY MB5024
Compatible with PLUTO PL5024, (replacing the brackets) no longer in production.
NICE RBA3 REPLACEMENT CONTROL CENTRAL BOARD FOR ROBUS 400 600 1000 1000P AND RUN 1500
REPLACEMENT CONTROL CENTRAL BOARD FOR NICE ROBUS AND NICE RUN MODELS
RB400, RB600 RB600P, RB1000 RB1000P
RUN1500 RUN1500P
NICE EPMB EXTERNAL PHOTOCELL COPY FOR CONNECTION BY BLUEBUS
TECHNICAL FEATURES:
Estimated flow rate (m): up to 15 for maximum TX-RX dissolution ± 5 (the device can signal an obstacle even in adverse weather conditions)
Power supply: the device can only be connected to “BlueBUS” networks from which it takes power supply and sends output signals
Photocell...
