Kit for the automation of swing gates with leaves up to 7 m, at 24 Vdc, external assembly ideal for residential use. Electromechanical gearmotor with magnetic encoder. New kit designed for the Solemyo solar power system and the Opera system for the management, programming and diagnostics of remote automations thanks to the new Moonclever control unit (MC824H) equipped with Nice BlueBUS technology.
Reliability and durability over time, thanks to the body composed of two sturdy aluminum shells with polyester paint; more resistant to atmospheric agents. Internal moving components entirely in steel, light alloys and technopolymers.
Silence: patented bronze spiral arrangement of the internal parts.
Large and convenient connection compartment: quick and easy access from above to the internal parts positioned in the upper compartment of the motor.
Easy installation and maintenance.
Moonclever MC824H control unit:
Simple programming, with a single button;
Self-learning of the limit switches in opening and closing;
Self-diagnosis of anomalies;
Programming of the pause time;
Pedestrian door;
Slowdown in opening and closing;
Dual technology obstacle detection;
Operation in the absence of power with optional rechargeable batteries (PS324);
Prepared for connection of the latest generation sensitive edges
NICE RUN 1500 MOTOR REDUCER FOR AUTHORIZATION EXPERIENCES 1500KG 24V
Features:
- Power supply: 230V 50/60Hz
- Absorption: 2
- Power: 400W
- Speed: 0.25 m/s
- Come on
- Working cycle: 60 cycles now
- Degree of protection: IP44
- Operating temperature: -20 ÷ +50 °C
- Size: 400 x 255 x 390 mm
- Weight: 19 kg
EAN.8032595796305
Estimated range 15 meters (30 with jumper + 10 cut)
Power supply without jumper 24 Vac/Vdc limits: 18-35 Vdc, 15-28 Vac with jumper 12 Vac/Vdc limits: 10-18 Vdc, 9-15 Vac
Absorption (mA) 25 RX, 30 TX
Maximum absorbed current: about 55 mA (TX + RX)
Angle of the beam emitted by the TX: 20° (± 25%)
Angle of the detection area of the RX: about 20°, without...
NICE TOONA TO7024 SINGLE-WING KIT FOR SWING GATE AUTOMATION UP TO 7M/WING 24V
Kit includes:
1 x TO4024 24V electromechanical operator
1 x MC824H electronic control unit
2 x MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 433MHz OXIDB plug-in receiver
Manuals and safety certificates included in the box
24-MONTH...
NICE MC800 CONTROL UNIT FOR 230V SWING DOOR AUTOMATION
COMPATIBLE WITH:
Nice Toona TO4005, TO4006, TO4015, TO4605, TO5015, TO5016, TO5605.
Nice Hyppo HY7100, HY7005.
Nice Wingo WG4000, WG4010, WG5000.
Nice Too TOO3000, TOO4500.
Nice Metro MFAB3000, MFAB3000L
Nice Big Metro LFAB4000
Nice MC800 control unit
For one or two 230 V gate motors
With OX plug-in...
NICE SPARE NUT + NUT ASSEMBLY FOR WINGO WG2024 WG4024 WINGO4024 PRTO06C
APPLICATION
NICE WINGO WG2024 swing door motor
NICE WINGO WG4024 swing door motor
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
Technical characteristics
Power supply:Via Bluebus
Absorption:1.5 BlueBus unit
Degree of protection (IP): 44
Dimensions (mm): 70x27x70 h
Weight (g): 200
NICE HYKE COMPLETE KIT FOR AUTOMATION OF SWINGING GATES WITH ARTICULATED ARM UP TO 3.5 MT 24V HYKEBDKCE
Articulated arm motors for external mounting ideal for large pillars. Bidirectional technology.
Kit including:
No. 1 electromechanical operator 24v HK7024 with integrated control unit
No. 1 electromechanical operator 24v HK7224
No. 2 dual-channel...
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 4MT RACK KG RB400BDKCE-4MT
KIT COMPOSED OF:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL PLUG-IN RECEIVER
1 ELDC LED FLASHING LIGHT WITH INTEGRATED ANTENNA
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL...
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE TOONA MOTOR ATTUATORE ELETTOMECCANICO 24V CON ENCODER PER ANTE BATTENTI LUNGHEZZA MAX 7 METRI T7024
Features:
- Typology: electric motor for gates or gates before battenti;
- Power: 24Vdc;
- Maximum absorption: 5A;
- Nominal absorption: 2.5A;
- Maximum assorbite power: 120W;
- Nominal power absorption: 60W;
- Protection grade: IP44;
- Corsican: 584...
NICE PS324 BUFFER BATTERY GROUP 24V POWER SUPPLY WITH BATTERY CHARGER
Features
24V battery with integrated battery charger (for motors in the 24 Vdc version)
The battery kit consists of 2 12 Volt batteries in series to produce 24 Volts and a charger card.
This battery block is integrated into the control logic box MC824H MC424L MCA2 MCA1 in the Hyppo...
NICE OXIBD BIDIREKTIONALER PLUG-IN-RECEIVER MIT OPERA-SYSTEM-FUNKTIONEN
OXIBD ist mit allen Nice-Steuergeräten kompatibel, die über einen SM-Anschluss verfügen, sodass auch bereits vorhandene Nice-Automatisierungen bidirektional betrieben werden können.
Ergonomisches Design: bequeme und praktische Position zur Verwendung der Antennenanschlüsse, der Taste...
NICE 24V EMERGENCY BATTERY KIT WITH INTEGRATED CHARGER PS124
24V battery with integrated charger. The kit is integrated into the engine block and connects to the control unit using the supplied cable.
The kit consists of two 12V batteries connected in series to generate 24V and a charging plate.
This battery pack is integrated into the MC424 control...
NICE WM001G NICEWAY RADIO CONTROL UP DOWN STOP AWNINGS AND ROLLER SHUTTERS
Remote control for awnings, roller shutters and rolling shutters with Nice Way motorization model WM001G with up, down and stop function, 433.92 Mhz in rolling code mode. It is programmed in self-learning on the radio receiver.
TECHNICAL CHARACTERISTICS
Carrier frequency: 433.92...
NICE WALKY1024 BDKCE KIT FOR BATTENT CANCELERS 24V WITH ANTA FINO A MAX 1.8 MT
The kit contains:
1x WL1024C - 24V electromechanical motor with integrated power station and OXIBD bidirectional radio receiver included
2x ON2E - Two-channel remote control
1x TS - Signboard
EAN.8032595796893
NICE MC824H CONTROL UNIT FOR BETTENTE GATE WITH BLUEBUS TECHNOLOGY ENCODER
Pre-flashing time tpre (s) 0: 10 Force adjustment (%)
Obstacle detection (sensitivity) Min ÷ max
Force adjustment (%) -
Obstacle detection (sensitivity) min ÷ max
Container dimensions (mm) 230x120x300 h
THE RB600BDKCE/MT4 24V KIT CONTAINS:
1 RB600 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF BUS PHOTOCELLS EPMB
4 MT PLASTIC RACK REINFORCED WITH STEEL
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1 NICE SIGNAL TABLE
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 KG RB400BDKCE
KIT COMPRISING:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL CONNECTION RECEIVER
1 LED FLASHING LIGHT WITH INTEGRATED ANTENNA ELDC
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL TRANSMITTERS ON2BD
1...
NICE RBA3 REPLACEMENT CONTROL CENTRAL BOARD FOR ROBUS 400 600 1000 1000P AND RUN 1500
REPLACEMENT CONTROL CENTRAL BOARD FOR NICE ROBUS AND NICE RUN MODELS
RB400, RB600 RB600P, RB1000 RB1000P
RUN1500 RUN1500P
NICE TOONA 24V ELECTROMECHANICAL ACTUATOR MOTOR WITH ENCODER FOR SWING GATES MAX LENGTH 5 METERS TO5024
Compatible with MOBY MB5024
Compatible with PLUTO PL5024, (replacing the brackets) no longer in production.
CODE
RB1000
ELECTRICAL DATA
ALIMENTATION (VAC 50/60 HZ)
230
(A)
2,3
POWER (W)
450
PRESTAZIONAL DATA
(M/S)
0.28
FORZA (N)
900
WORK CYCLE (CICLI/ORA)
50
DIMENSIONAL DATA
PROTECTION GRANT (IP)
44
FUNCTIONING TIME (°C MIN/MAX)
-20 ÷ +50
DIMENSIONS (MM)
330x210x303 h
PESO (KG)
13
NICE ROBUS KIT 400 BD 24V FOR SLIDING GATES UP TO 400 5MT RACK KG RB400BDKCE-5MT
KIT COMPOSED OF:
1 RB400 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR WITH BUILT-IN RBA3 CONTROL UNIT.
1 OXIBD BIDIRECTIONAL PLUG-IN RECEIVER
1 ELDC LED FLASHING LIGHT WITH INTEGRATED ANTENNA
1 PAIR OF SYNCHRONIZED EPM BUS PHOTOCELLS
2 2-CHANNEL 433 MHZ BIDIRECTIONAL...
NICE LP21 SINGLE-CHANNEL METAL MASS DETECTOR WITH MAGNETIC LOOP 24V
NICE LP21 single-channel inductive metal mass detector with magnetic loop. Power supply 24v
CABLE NOT INCLUDED
NICE REPLACEMENT ASSEMBLED ELECTRIC MOTOR GROUP FOR WINGO WG5000 WG4000 230V WGA05
Assembled 220V WINGO electric motor
APPLICATION
Nice Wingo 5000 (WINGO5KCE)
Nice Wingo (WINGO 4000) (WINGOKCE)ING
Nice Wingo L (WG4010)
CENTRAL MC424L COMMUNITY SCHEDA WITH BOX FOR MOTOR WINGO 24V
Control unit with integrated receiver for one or two 24 V engines without encoder, designed for Solemyo
TECHNICAL FEATURES:
Network power supply (Vac 50/60 Hz): 230 10%
Battery power (Vdc): 21 28
Max motor power and current (VA; A): 75; 3
Max service current 24 V (A): 0.2 +0,1
Voltage and max...
NICE MCA5 FOR MC800 REPLACEMENT CONTROL UNIT FOR SWING GATES 220V SPMCA5
Replacement control unit for 220V swing gate motors (1 OR 2 MOTORS)
Model: MCA5
Compatibility: Designed as a replacement for the MC800 control panel for NICE gate automation.
Generation: This is the new generation of the Cent. MCA5 board, designed specifically for the MC800 model.
NICE TOONA TO5024 SINGLE-WING KIT FOR AUTOMATING SWING GATES UP TO 5M/WING 24V
Kit includes:
1 x TO5024 24V electromechanical operator
1 x MC824H electronic control unit
No. 2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 433MHz OXIDB plug-in receiver
Manuals and safety certificates included in the box
24-MONTH...
NICE PAIR OF WIRELESS BATTERY-OPERATED WALL-MOUNTED PHOTOCELLS BLUEBUS EPMOW
Features:
- Range: 20 meters
- Output power: 3 V DC, with CR123 lithium battery
- Adjustment: approximately 10° along the vertical axis
- Protection rating: IP44
- Dimensions: 50 x 40 x 105 mm
Reflective technology (EPMOR) allows you to wire
only the main photocell and not the...
NICE MC200 GARAGE DOOR AUTOMATION CONTROL UNIT 220V
Enclosure dimensions (mm): 128x112x43 h
Built-in radio card: compatible with Nice FloR and Smilo systems.
Programmable input as step-by-step or open.
Input for connection of an 8.2kOhm resistive safety edge.
Semi-automatic and automatic operation.
Flashing light output.
Phototest or shutter status...
NICE ERA ELDC LED FLASHING LIGHT 12-36 Vdc WITH INTEGRATED ANTENNA
NICE ERA series flashing light, model ELDC 12-36v
NEUTRAL, LED LIGHT, 12-36 Vdc, FOR SUITABLE CONTROL UNITS
Integrated antenna 433.92 MHz
IP44 protection
Compatible with:
A924, MC824H, MC424L, WALKY, HYKE, ROAD, ROBUS, RUN, NAKED SLIDING 400, SPIN / SPINBUS, TEN, SOON, S/M/L BAR, WIDE
SYKCE SLEMYO ALIMENT KIT FOR AUTHORIZATION 24VIL KIT CONTIENE
N°1 Photovoltaic solar panel for 24V power supply with maximum power 15W.
N°1 PSY24 Box battery 24V control circuit and transport handles. It keeps the electrical energy produced by the SYP panel continuously and permanently delivering it throughout the day.
Technical characteristics
Voltage...
NICE EPMB EXTERNAL PHOTOCELL COPY FOR CONNECTION BY BLUEBUS
TECHNICAL FEATURES:
Estimated flow rate (m): up to 15 for maximum TX-RX dissolution ± 5 (the device can signal an obstacle even in adverse weather conditions)
Power supply: the device can only be connected to “BlueBUS” networks from which it takes power supply and sends output signals
Photocell...
Technical characteristics
Power supply:Via Bluebus
Absorption:1.5 BlueBus unit
Degree of protection (IP): 44
Dimensions (mm): 70x27x70 h
Weight (g): 200
€93.50
Last items in stock
NICE TOONA KIT 7024 BD AUTOMATION FOR TWO-LEAF SWING GATES UP TO 7M PER LEAF 24V
Kit includes:
2 x TO7024 24V electromechanical operators
1 x MC824H electronic control unit
2 MYGO4 dual-channel transmitters
1 pair of EPMB bus photocells
1 ELDC LED flashing light
1 OXIDB 433MHz plug-in receiver
1 ‘automatic gate’ warning sign
Manuals and safety certificates included in the box
