Frequently tested service class up to 150,000 cycles
Power supply 230 Vca - 50/60 Hz
Power supply 24 Vca 50/60 Hz
Absorption 0.45 A
Push 600 N
Opening and closing speed 0.1 - 0.3 m/s
A KEY manual opening unlocking
Operating temperature -20°C / +55°C (-35°C / +55°C with NIO activated)
Protection rating IP 44
LCU50DC control panel
DIMENSIONS 260x195x300 mm
Ditec ION is the new range of electromechanical actuators for sliding gates designed to ensure quality, robustness, reliability over time and to facilitate installation and maintenance.
The range consists of two 400 Kg and 600 Kg front engines, and integrates the multifunctional control panel into the operator.
INTELLIGENT
Ditec ION includes a rapid self-learning procedure that automatically records stop positions by adjusting to the most different settings.
24V ENCODER VIRTUAL
For constant electronic control of impact forces and an immediate detection of obstacles by ensuring the operator’s arrest or reverse of the motorcycle (if configured). Optional magnetic finish. In addition, in case of blackout, the electronic panel intervenes by activating the built-in (optional) batteries that allow the correct operation of the system.
DITEC AIR1000B 24V KIT FOR TRAILED GARAGE DOOR OVERHEAD INTENSIVE USE 17 M²/200 KG BLUETOOTH CONNECTIVITY
3.3M TRACK
The Kit Includes
1 Ditec Air 1000B Motor
1 TS100X3 Belt transmission system with 3.3 m steel guide (3x1 m)
EAN.0615402454247
Manuals and certifications contained in the box
DITEC PHOTOCELLULE LAB4 24V FOR EXTERNAL MONTAGGAGE
PROVISION OF SAFETY AT INFRAROXED RELEASE'
ARE CONFORMS TO MAXIMUM TECHNICAL REQUIREMENTS OF NORMATICS
AFFIDABLE IN TIME AND SEMPLEMENTS TO INSTALLATE
THANKS TO DESIGN IF THEY ADAPT TO INSTALLATION.
IDEAL FOR INDUSTRIAL APPLICATIONS
LATERAL FISHING POSSIBILITY
PORTED MAX: 30M
24VCC/ 24VCA (NO BATTERIA)...
DITEC DITNEOS500GL KIT WITH NEOS 500G MOTOR FOR SLIDING GATE UP TO 500 KG 6MT RACK
COMPOSITION:
1 NEOS500G OPERATOR
1 CS12MG CONTROL PANEL WITH RCB50E BI-FREQUENCY RADIO RECEIVER 433-868 MHZ
2 ROLLING CODE 2CH REMOTE CONTROLS (1XZEN2 + 1XZEN2W)
1 PAIR OF LIN2 PHOTOCELLS
1 FL24 FLASHING LIGHT COMPLETE WITH ANTENNA
6 MT PLASTIC RACK REINFORCED IN STEEL
1...
DITEC CROSS 18VEP MOTOR ACTUATOR FOR SLIDING GATES UP TO 1800 KG INTENSIVE USE
LCA85 control panels (integrated)
ZENRS 433 MHz radio receiver module (included)
Features
DITEC 230V CROSS18VEP MOTOR
FOR SLIDING GATES UP TO 1800 Kg
INTENSIVE APPLICATIONS MAGNETIC LIMIT SWITCH
integrated control unit
with foundation plate
TECHNICAL CHARACTERISTICS CROSS18VEP...
DITEC LINCB KIT PAIR OF ALUMINUM COLUMNS HEIGHT 50CM FOR LIN2 PHOTOCELLS
KIT COMPOSED OF
N°1 PAIR OF LINCB COLUMNS FOR LIN2 AND LIN2B PHOTOCELLS
N°2 LINBS SUPPORT BASE
DITEC ION4B 24V 400KG MOTOR OPERATOR 24V FOR SCORREVAL CANCELLO CONNESSION BLUETOOTH
INTEGRATED COMMUNITY, DIM. 260X195X300MM
DITEC 24V ION4B MOTOR
UP TO 400 KG
INTENSIVO RESIDENCES
Integrated LCU50DC control panel
WITH FOUNDATION
Description ION4B
Capacity 400 KG
ENCODER VIRTUAL racing management
Maximum opening 12 Mt
Frequently tested service class up...
DITEC MOTOR PWR50H 24V FOR SWING GATE 5MT INTENSIVE USE
Complete with fixing brackets
mechanical pin stop (PWRFM) and screw protection dust brushes
Mechanical fixed stroke management
Maximum capacity 800 kg x 1,75 m 280 kg x 5 m
Power supply 24 V
Maximum power 12 A
Absorption 65 W nom. / 288 W max
Push 6000 N
Opening speed 14÷80 s / 90°
Maximum speed 500...
DITEC SBU BATTERY CHARGING MANAGEMENT BOARD FROM THE ELECTRICITY MAINS OR PHOTOVOLTAIC PANELS
COMPLETE WITH CABLES AND MOUNTING BRACKETS FOR SWING GATES,
BARRIEDS (DITEC QIK), AND SLIDING GATE MOTORS (NEOS SERIES)
"PHOTOVOLTAIC PANELS NOT INCLUDED"
DITEC LCU40H CENTRE OF COMMUNITY FOR 1 OR 2 MOTORS 24V
FOR 1 OR 2 MOTORS FINO A 12 A (6 A PER LCU30H)
- COMPATIBILITY: DITEC PWR25H, DITEC PWR35H, DITEC PWR50H/HV/HR, DITEC ARCBH/1BH, DITEC FACIL, DITEC CUBIC, DITEC DOR
- RESEARCH MODULE RADIO 433 MHZ PRE-INSTALLED (COMMUNITY WITH MODULE 868 MHZ)
- EXTRAILABLE MEMORIES
EAN.0615402459815
KIT DITEC DITCB24 24V CUBIC UNDERGROUND SWING GATE COMPLETE WITH LEVERS, BOXES NOT INCLUDED ML331
Kit composed of:
2 CUBIC6H gearmotors COMPLETE WITH LEVERS AND RELEASES
1 LCU40H control panel with built-in radio receiver
1 pair of LIN2 photocells
2 CUBIC6SBL lever releases
2 CUBIC6L 110° opening lever groups
2 2Ch rolling code remote controls (1xZEN2 +...
DITEC DOITDD1 ELECTROMECHANICAL ACTUATOR KIT FOR SIDE MOUNTING ON SECTIONAL DOORS
SIDE MOUNTING FOR LARGE SECTIONAL DOORS
Kit contents:
1 DOD14 wired actuator, complete with socket and motor power supply panel
1 LCA85 electronic panel complete with integrated radio receiver
1 ZEN4 four-channel rolling code remote control complete with wall bracket
1 PT3...
PAIR OF SLIM PHOTOCELLS WITH BATTERY FOR EXTERNAL MOUNTING DITEC LIN2B
IT IS A SAFETY DEVICE WITH MODULATED INFRARED RAYS. WITH DOUBLE RELAY
THEY COMPLY WITH THE MAXIMUM TECHNICAL REQUIREMENTS OF THE REGULATIONS
RELIABLE OVER TIME AND SIMPLE TO INSTALL
THEIR DIFFERENT DESIGN MEETS ANY TYPE OF INSTALLATION.
ADJUSTABLE BOARD 3 POSITIONS
MAX RANGE: 20M
POWER...
€64.50
In stock
DITEC KIT ION 24V 400KG CONNETTIVITA' BLUETOOTH CANCELLO SCORREVOLE DITION4BL 6MT CREMAGLIERA ML323
Composition Kit :
1 gear motor ION4B
1 built-in LCU50DC control panel with radio receiver
2 remote controls rolling code 2Ch (1xZEN2 + 1xZEN2W)
1 pair of LIN2 photocells
1 full FL24 flashing
N°6 MT Steel reinforced Naylon rack
1 panel ammonia E109B
KIT RESIDENTIAL APPLICATIONS 400 KG, ION 4 DITEC 24V
