

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Chemical base |
Exterior of dimetacrilic acid |
Colour |
Fluorescent blue |
Density |
1,12 g/cm3 |
Viscosity 1 min/max |
4000-9000 mPas |
Conditions for viscosity 1 |
25°C, Brookfield RVT, 3/2.5 rpm |
Viscosity 2 min/max |
1500-3000 mPas |
Conditions for viscosity 2 |
25°C, Brookfield RVT, 3/2.0 rpm |
Max filling capacity |
0.25 mm |
Point of flammability min |
100 °C |
Min/max initial resistance |
5-15 min |
Final resistance min/max |
1 h-3 h |
Functional resistance min/max |
0.5-1 h |
Conditions for pressure and cutting resistance min/max |
12-20 N/mm2 / according to DIN 54452 |
Pressure and cutting resistance conditions |
compliant with DIN 54452 |
Break force min |
21 |
Predominant couple min |
10 NM |
Operating temperature min/max |
-55 to 150 °C |
Working temperature min/max |
5 to 35 °C |
Production storage time |
12 months |
Storage conditions from production |
at room temperature |
Weight content |
50 g |
Silicone |
Yes |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
Removable resistant and sealing brakes:release system with one hand onlyFor medium-strength bonding Removable with standard tools Also compatible with stainless steel and passive surfaces No need for accelerating agents or activators Excellent heat resistance and other substances Universal products with a wide range of applications Prevents removal as a result of vibrations and impacts Holding equal to a mechanical fastening Very resistant Resistant to a large number of alkaline, gas, solvents, oils and carburetors Without silicone System DOS:Practical one-hand dosing system thanks to intelligent closure A hand is always free.Continuous Adjustable Dispensing System The delivery can be adjusted to meet the various applications, and to keep consumption and costs at a minimum.No material residue in the supply channel optimized costs thanks to the complete emptying of the bottle, without leaving product residue inside IndicationThe following plastics may be altered in case of prolonged exposure:ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulphon, SAN (lurane, Tyril), Vinidur, vulcanized fiber and painted surfaces.It is suggested to always perform preliminary tests.NSF tested in accordance with ANSI 61, DVGW (German Association for Gas and Water) (DIN EN 751-1)Instructions for use are test-based recommendations we have made and our experience;perform appropriate tests before each application.Due to the large number of applications and storage and usage conditions possible, all liability is declined for the result of specific applications.To the extent that our free customer service provides technical information or acts as an advisory service, it disclaims any liability, except where the advice or information provided falls within the scope of the contracted specified service or the consultant deliberately act.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further develop the products
Support material Silicone Colour Black Width 25 mm Working temperature min/max -50 to 260 °C Breaking extension 300 % Temperature resistance min/max -60 to 260 °C UV resistance Yes Moisturizer Yes Length 3,65 m Overall thickness 0.5 mm Dielectric resistance 15000 V/mm
Content 400 ml Odore/profuse Characteristic Chemical base Aliphatic hydrocarbons Density 0,825 g/cm3 Point of flammability min 62 °C
Material PE - Polyethylene Colour Yellow-black Width 70 mm Length 200 m
Measures PHH Handle material Multicomponent plastic Handle length (B) 96 mm Blade length (A) 80 mm Length 176 mm
Measures PHHY Handle material Multicomponent plastic Handle length (B) 114 mm Blade length (A) 150 mm Length 264 mm
Number of pieces in the assortment/kit 8 PZ Key opening 6 x 7 mm8 x 9 mm10 x 11 mm12 x 13 mm14 x 15 mm16 x 17 mm18 x 19 mm20 x 22 mm Product weight (per piece) 1206
Number of pieces in the assortment/kit 6 PZ Key opening 10 mm12 mm13 mm17 mm19 mm8 mm
Content 869.6 ml Odore/profuse Characteristic Weight content 970 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Yellowish Hardness supplement % Density 1,15 g/cm3 Max service life 15 min Useful period min 10 min Conditions for duration at 20°C...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
Chemical base Hydrocarbon Basic oil Synthetic mineral oil Colour Yellowish Odore/profuse Oil Density 0,742 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 180 °C Max temporary thermal resistance 200 °C Inflamability point of the active ingredient...
Type of tip Internal recessed hexagon Included Content mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Number of pieces in the assortment/kit 9
Length 350 mm Current min/max 60-80A Rules ISO 2560, DIN 1913, UNI 5132 American Welding Society (AWS) A 5.1: E 7016 Tensile strength min. 510 N/mm2 Tenacity to min on test with V cut 80 J Current min 60 A Max current 80 A Longitudinal extension min 28 %
Content 1.255 Weight content 2 kg Colour Beige RAL 1001 Hardness supplement % Density 1.593 g/cm3 Density conditions 20°C, DIN 53217 Max service life 4 min Useful period min 3 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min Max drying time...
Container Bottle Weight content 500 g Colour WhiteTransparent Chemical base Polyvinyl acetate dispersion PH value 6.25 +/- 0.25 Viscosity 13500 mPas Conditions for viscosity to 23°C Density 1,08 kg/l Min film formation temperature 0 °C Production storage time 12 months Relative humidity wood...
Impronta 1/4 chicken. Number of pieces in the assortment/kit 44 PZ Length 177 mm Width 110 mm Height 50 m
Content 400 ml Chemical base Synthetic resin Available colors Average grey Colour Average grey Working temperature 20 °C Drying time min 20 min Max drying time 60 min Conditions for drying time at 20°C Max coating thickness 50 μm Density 1,07 g/cm3 Spraying distance min 20 cm Density...
Roll width 19 mm Roll length 3 m Thickness 0.5 mm Temperature resistance min/max -40 to 150 °C Max temporary thermal resistance 200 °C Breaking extension 800 %
Content 250 ml Weight content 229 g Chemical base Water and ethanol Odore/profuse Perfume Colour Blue PH value 7 Point of flammability min 23 °C Density 0,969 g/cm3 Production storage time 36 months Without AOX Yes Silicone Yes Biodegradable Yes Container Tanics
Weight content 198.75 g Production storage time 24 months Colour Color Content 250 ml
Colour Black Width 19 mm Length 25 m Thickness 0.15
Blade width 18 mm Length 170 mm
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Light grey (light gray) Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working...
Impronta 1/4 chicken. Number of pieces in the assortment/kit 10 PZ Height 81 mm
Temperature measurement range min/max -50 to 650 °C Temperature measurement range min -50 °C Max temperature measurement range 650 °C Thermometer measuring cone 12:1 Rated voltage 9 V/CC Spectral range min/max 8-14 μm Min spectral range 8 μm Max spectral area 14 μm Time reaction 150 ms Automatic...
Content 500 ml Container Morning Chemical base Isopropanol Conditions for density 0.9 g/cm3 / 23°C, 50% relative humidity Production storage time 24 months
Working temperature min -10 °C Max working temperature 50 °C Production storage time 36 months
Content 310 ml Chemical base Neutral reticulation silicones, polymer base Colour Transparent Maximum working time 25 % Shore hardness A 25 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative...
Content 1 Product weight (per piece) 1035 g Colour YellowGreen Production storage time 24 months
Content 400 ml Container Bomboletta aerosol Production storage time 36 months
Chemical base Mineral oil Basic oil Synthetic Colour Yellowish Odore/profuse Characteristic Density 0,773 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 170 °C Max temporary thermal resistance 200 °C Cinematic viscosity basic oil 2000 Basic...
Content 300 ml Container Bomboletta aerosol Type of spraying head Cobra nozzle Production storage time 24 months
Content 150 ml Colour Color Chemical base Propane Conditions for density 0,69 g/cm3 / 20°C Production storage time 24 months
Content 4 Odore/profuse Lemongrass Colour White
inmate 1282.1 Odore/profuse Characteristic Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracite, metallic Hardness supplement % Density 1,404 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Content 200 ml Odore/profuse Characteristic Colour Color Production storage time 24 months
Height (C) 210 mm Width (A) 465 mm Depth (B) 390 mm Material PE - Polyethylene Product weight (per piece) 5200 g
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Transparent Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity...
Colour Yellow/green Width 19 mm Length 25 m Thickness 0.15 mm
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Content 150 ml Container Bomboletta aerosol Production storage time 24 months
Line Thickness 1 mm Colour Black Version Permanent waterproof Shape tip Round table Carcase material Plastic Silicone No
Content 0.4 l Container Spray bottle Temperature conditions min -10 °C Maximum temperature conditions 140 °C Type of spraying head Cobra nozzle Production storage time 24 months
Rated voltage 28 V/CC Thread type x thread diameter M14 Number of max vacuum turns 9000 G/min Max cutting disc diameter 125 mm Weight without rechargeable battery 1.8 kg Output power 500 W
Adhesive base Acrylic Support material Polyethylene foam Colour Anthracite (basic material) Thickness 0,8 mm Adhesive force 25 mm 19N Breaking extension 300 % Temperature resistance min/max -40 to 95 °C Working temperature surface min/max 5 to 40 °C Working temperature surface min 5 °C Max surface...
Content 400 ml Chemical base Nitro alchid Colour Zinc, clear Vulcanization time min 1 h Complete hardening/vulcanization conditions 20°C Volcanic time max 1 h Resistance to saline fog test 500 h Temperature resistance max 200 °C Time out of dust 10 min Dry layer thickness (first longitudinal...
Chemical base |
Exterior of dimetacrilic acid |
Colour |
Fluorescent blue |
Density |
1,12 g/cm3 |
Viscosity 1 min/max |
4000-9000 mPas |
Conditions for viscosity 1 |
25°C, Brookfield RVT, 3/2.5 rpm |
Viscosity 2 min/max |
1500-3000 mPas |
Conditions for viscosity 2 |
25°C, Brookfield RVT, 3/2.0 rpm |
Max filling capacity |
0.25 mm |
Point of flammability min |
100 °C |
Min/max initial resistance |
5-15 min |
Final resistance min/max |
1 h-3 h |
Functional resistance min/max |
0.5-1 h |
Conditions for pressure and cutting resistance min/max |
12-20 N/mm2 / according to DIN 54452 |
Pressure and cutting resistance conditions |
compliant with DIN 54452 |
Break force min |
21 |
Predominant couple min |
10 NM |
Operating temperature min/max |
-55 to 150 °C |
Working temperature min/max |
5 to 35 °C |
Production storage time |
12 months |
Storage conditions from production |
at room temperature |
Weight content |
50 g |
Silicone |
Yes |