

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Adhesive base |
Acrylic |
Support material |
Polyethylene foam |
Colour |
Anthracite (basic material) |
Thickness |
0,8 mm |
Adhesive force 25 mm |
19N |
Breaking extension |
300 % |
Temperature resistance min/max |
-40 to 95 °C |
Working temperature surface min/max |
5 to 40 °C |
Working temperature surface min |
5 °C |
Max surface working temperature |
40 °C |
UV resistance |
Yes |
Moisturizer |
Yes |
Production storage time |
24 months |
Storage conditions from production |
at 20°C and 50% humidity |
Width |
12 mm |
Length |
10 m |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
Two-sided tape able to withstand high loads, with polyethylene support and acrylic adhesive Excellent adherenceThe tape offers excellent reliability right after application.Final adhesion after 24 hours Excellent adhesion also on rough and slightly irregular supports Closed cell supportThe tape damps the vibrations and allows to compensate for the expansion of the various materials.High resistance level at high temperatures, UV rays and atmospheric agentsThe adhesive tape can be used in indoor and outdoor environments It does not lose adhesive force even at high temperatures The instructions for use are recommendations based on the tests carried out and our experience;perform tests personally before each application.Due to the high variety of applications, storage conditions and since it is not possible to control the application, use or processing of products, any liability is declined.We accept all liability for any technical information or consultancy provided free of charge by our customer service.Therefore, before using the product, who intends to use it is required to determine whether or not it is suitable for the intended use and, in any case, assumes any responsibility that may arise from its use.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further develop products.
Support material PE film Colour Black Length 10 m Width 50 mm Overall thickness 1.5 mm Working temperature min/max 5 to 40 °C Temperature resistance min/max -30 to 80 °C
Content 400 ml Colour Light grey (light gray) Drying time 20 min VOC concentration (CH) 742,8 g/l Production storage time 60 months
Length 100 mm Diameter 2,8 mm Thickness line min/max 0.5-2.8 mm Colour Grey
Material PE - Polyethylene Colour Yellow-black Width 70 mm Length 200 m
Width 220 mm Height 220 mm Length 220 mm Colour Black
inmate 1282.1 Odore/profuse Characteristic Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracite, metallic Hardness supplement % Density 1,404 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Chemical base Water Colour Transparent Density 1 g/cm3 PH value 7 Working temperature min -10 °C Max working temperature 50 °C Biodegradable Yes Weight content 1 kg Production storage time 36 Mes
Measures PZ1 Blade length 25 mm Length/width handle 62 / 31 mm
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Black Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity Min...
Container Bottle Colour White Working temperature min/max 18 to 22 °C Conditions for opening time min/max 7-9 min / 20°C Production storage time 12 months
Wire diameter (Ø) 3,25 mm Length 450 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Number of pieces in the assortment/kit 13 PZ
Content 400 ml Odore/profuse Characteristic Colour Color Chemical base Aliphatic hydrocarbons Conditions for density 0,78 g/cm3 / Active ingredient, 20°C Point of flammability min 40 °C Without acetone Yes Silicone Yes Without AOX Yes
Rated voltage 12 V/CC Min/max speed 1/2 0-400 / 0-1500 G/min Max hard/soft pair 32 / 19 Nm Spindle opening min/max 0,8-10 mm Spindle attachment 1/2 chicken.x 20 UNF Number of rechargeable batteries/battery 2 Battery capacity 2Ah Max hole diameter in steel 10 mm Max screw diameter 6 mm Length 177...
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
Content 1 Chemical base Organic detergent substances Density 0,8 g/cm3 Conditions for density 0,8 g/cm3 / 20°C Density conditions at 20°C Colour Color Container Morning Odore/profuse Characteristic Production storage time 12 months Weight content 800 g Product weight (per piece) 921 g
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Colour Red fire RAL 3000 Content 50 ml Conditions for density 0,99 g/cm3 / at 20°C, 50% relative humidity Resistance to touch min. 30 min Final resistance min/max 12 h-24 h Working temperature min/max 5 to 30 °C Temperature resistance min/max -40 to 145 °C Silicone Yes Without solvents Yes...
Length 350 mm Current min/max 60-80A Rules ISO 2560, DIN 1913, UNI 5132 American Welding Society (AWS) A 5.1: E 7016 Tensile strength min. 510 N/mm2 Tenacity to min on test with V cut 80 J Current min 60 A Max current 80 A Longitudinal extension min 28 %
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Black Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Measures PZ2 Blade length 25 mm Length/width handle 62 / 31 mm
Length 140 mm Max cable diameter cutting capacity on aluminium/blade 10 mm Cutting capacity with cross section aluminum wire / max blade 35 mm2 Material Stainless steel Handle material Multicomponent plastic Product weight (per piece) 72 g
Chemical base Alcohol with additives Odore/profuse Lemongrass Colour Transparent Content 50 ml Conditions for shelf life from production 24 Months / to 23°C and 50% relative humidity Viscosity/consistency Ice cream Conditions for pH value 6,0-7,5 / neutral Conditions for density 0,885 g/cm3 / 23°C
Colour Brown Width 19 mm Length 25 m Thickness 0.15 mm
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Chemical base Fats and synthesis additives in hydrocarbon solvents Basic oil Synthetic Oil / Mineral Combination Colour Optical green Odore/profuse Characteristic Density 0,78 g/cm3 Temperature conditions min -25 °C Maximum temperature conditions 150 °C Max temporary thermal resistance 175 °C...
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Length 300 mm Current min/max 70-110A Rules ISO 3581, DIN 8556 American Welding Society (AWS) A 5.4: AND 308L-16 Tensile strength min. 550 N/mm2 Tenacity to min on test with V cut 55 J Current min 70 A Max current 110 A Longitudinal extension min 35 %
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Light grey (light gray) Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working...
Content 400 ml Chemical base Epoxy resin Colour White grey Drying time 25 min Density 0,83 g/cm3 VOC concentration (CH) 83.5 % Production storage time 24 months
Content 200 ml Odore/profuse Characteristic Colour Color Production storage time 24 months
Content 5 Production storage time 36 months Container Plastic sleeve
Effective hand cleaner for multiple applications. Content 3 Odore/profuse Lemongrass Colour Green
WURTH DETERGENT BY CONDITION OF AIRATION BY MOTOR DIESEL 400 ML ART. 5861013300
Chemical base Cyanoacrylate Colour Transparent Density 1,21 g/cm3 Conditions for hardening time min/max 5-6 min / depending on the adhesive gap Conditions for voltage resistance min/max 4-7N/mm2 / ASTM D-412 compliant Tension resistance min/max 4-7N/mm2 Tension and cut resistance combined min 2N/mm2 Max...
Width 95 mm Height 160 mm Depth 95 mm Product weight (per piece) 431 g
Measures PHH Handle material Multicomponent plastic Handle length (B) 62 mm Blade length (A) 25 mm Length 87 mm
Voltage range min/max CA 12-1000 V/CA IP protection class IP 40 Category Overvoltage Protection CAT III/1000 V EN Standard 61010 Rechargeable battery/battery design 1.5 V Micro AAA Number of rechargeable batteries/battery 2
Brightness levels Front light 450-50 lm Torches 225 lm
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 1
Content 500 ml Temperature conditions min -30 °C Maximum temperature conditions 450 °C Inflamability point of the active ingredient 70 °C
Content 200 ml Product weight (per piece) 210 g Odore/profuse Characteristic Colour Color Production storage time 24 months
Weight content 40 g Colour Red Odore/profuse Characteristic Temperature resistance max 80 °C PH value Slightly acidic Density 1,1 g/cm3 Density conditions at 20°C Hydrosoluble No Viscosity/consistency Pastry Viscosity 10000 mPas Conditions for viscosity at 20°C
Measures PHHY Handle material Multicomponent plastic Handle length (B) 106 mm Blade length (A) 100 mm Length 206 mm
Colour Blue Width 19 mm Length 25 m Thickness 0.15
Adhesive base |
Acrylic |
Support material |
Polyethylene foam |
Colour |
Anthracite (basic material) |
Thickness |
0,8 mm |
Adhesive force 25 mm |
19N |
Breaking extension |
300 % |
Temperature resistance min/max |
-40 to 95 °C |
Working temperature surface min/max |
5 to 40 °C |
Working temperature surface min |
5 °C |
Max surface working temperature |
40 °C |
UV resistance |
Yes |
Moisturizer |
Yes |
Production storage time |
24 months |
Storage conditions from production |
at 20°C and 50% humidity |
Width |
12 mm |
Length |
10 m |