

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Content |
400 ml |
Odore/profuse |
Characteristic |
Chemical base |
Aliphatic hydrocarbons |
Density |
0,825 g/cm3 |
Point of flammability min |
62 °C |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
For cleaning of all gasoline and diesel engines Cleans the engine and oil power plant Engines with clean oil can now work at their maximum performance level.Quick and gentle cleaning process Do not affect seals Optimize exhaust gas emissions Compatible with catalytic converters Dissolves sediments on elastic bands Easy to use A 400 ml container is enough up to 5 liters of engine oil.1000 ml are enough for 10-15 liters of oil IndicationNot suitable for use on motorcycle with oil bath clutch that share a common oil circuitThe technical information provided, although based on our best experience, is to be considered, in any case, purely indicative and must be confirmed by exhaustive practical evidence.Due to the high variety of applications, storage conditions and since it is not possible to control the application, use or processing of the products, any liability is declined.We accept all liability for any technical information or consultancy provided free of charge by our customer service.Therefore, before using the product, who intends to use it is required to determine whether or not it is suitable for the intended use and, in any case, assumes any responsibility that may arise from its use.We guarantee a consistent quality of our products.Würth products are the subject of constant improvements.We therefore reserve the right to make technical changes and to further modify the products at any time without notice.
Length 100 mm Diameter 2,8 mm Thickness line min/max 0.5-2.8 mm
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Support material Silicone Colour Black Width 25 mm Working temperature min/max -50 to 260 °C Breaking extension 300 % Temperature resistance min/max -60 to 260 °C UV resistance Yes Moisturizer Yes Length 3,65 m Overall thickness 0.5 mm Dielectric resistance 15000 V/mm
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Hardness supplement % Chemical base Fiberglass Colour White Width 80 cm Weight per m2 300 g Useful duration min/max 10-15 min Conditions for duration at 20°C Drying time min 60 min Conditions for drying time at 20°C Temperature resistance max hardened material 80 °C Production storage time...
Width 220 mm Height 220 mm Length 220 mm Colour Black
Content 400 ml Odore/profuse Characteristic Colour Color Chemical base Aliphatic hydrocarbons Conditions for density 0,78 g/cm3 / Active ingredient, 20°C Point of flammability min 40 °C Without acetone Yes Silicone Yes Without AOX Yes
Colour Yellow Width 19 mm Length 25 m Thickness 0.15 m
Container Double card Chemical base Epoxy resin Colour Black Density 1,1 g/cm3 Odore/profuse Characteristic Tension resistance min 30 N/mm2 Tension and cut resistance combined min 1.7 N/mm2 Combined tensile and cut resistance conditions after four hours, 23°C, EN 1465 Conditions for voltage resistance...
Width 95 mm Height 250 mm Depth 95 mm Product weight (per piece) 582 g
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Grey Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Roll width 19 mm Roll length 3 m Thickness 0.5 mm Temperature resistance min/max -40 to 150 °C Max temporary thermal resistance 200 °C Breaking extension 800 %
Impronta 1/4 chicken. Number of pieces in the assortment/kit 10 PZ Height 81 mm
Chemical base Alcohol with additives Odore/profuse Lemongrass Colour Transparent Content 50 ml Conditions for shelf life from production 24 Months / to 23°C and 50% relative humidity Viscosity/consistency Ice cream Conditions for pH value 6,0-7,5 / neutral Conditions for density 0,885 g/cm3 / 23°C
Content 400 ml Colour Grey Medium Drying time 20 min VOC concentration (CH) 742,8 g/l Production storage time 60 months
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Colour White Tensile strength min. 500 MPa Longitudinal extension min 2
Content:105 pieces 14 TX inserts with hole 9 TX PH inserts 8 hexagonal inserts 7 hexagonal PZ inserts with hole 6 Tri-wing 2-point inserts 5 AW cut inserts 4 inch hexagonal inserts, multi-dent, XZN Ribe, squares 3 inserts each size Torq, Clutch, 5-point star with hole 1 hook screw 1 adapter for inserts 1 magnetic insert holder
Chemical base Synthetic rubber Colour Transparent Density 0,85 g/ml Odore/profuse Characteristic Working temperature min/max 0 to 30 °C Temperature resistance min/max -20 to 110 °C Point of flammability min -24 °C Min/max evaporation time 5 min-15 min Distance delivery min/max 15-25 cm Content...
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Brown Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity Min...
Content 200 ml Product weight (per piece) 210 g Odore/profuse Characteristic Colour Color Production storage time 24 months
Content 1500 ml Odore/profuse Characteristic Weight content 1500 g Chemical base Polyester Colour White Hardness supplement % Density 1,155 g/cm3 Density conditions at 20°C Max service life 4 min Useful period min 3 min Conditions for duration at 20°C Conditions for drying time at...
Chemical base Exterior of dimetacrilic acid Colour Fluorescent green Density 1,11 g/cm3 Viscosity min/max 500-900 mPas Conditions for viscosity 25°C, Brookfield RVT, 2/20 rpm Max filling capacity 0.15 mm Point of flammability min 100 °C Min/max initial resistance 5-15 min Final resistance min/max 5...
Measures PHH Handle material Multicomponent plastic Handle length (B) 96 mm Blade length (A) 80 mm Length 176 mm
Content 0.4 l Chemical base Mineral oil Colour Transparent light yellow Working temperature min/max for tank -10 to 40 °C Operating temperature min/max -30 to 130 °C Production storage time 24 months Min working temperature for tank -10 °C Type of spraying head Standard spray head Max treatment...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,09 g/cm3 Viscosity min/max 1800-2200 mPas Conditions for hardening time min/max 10-60 s / Based on material Conditions for voltage resistance min/max 12-25 N/mm2 / according to DIN 53288 Tensile strength min./max. 12-25 N/mm2 Tension and...
Content 4000 ml Odore/profuse Grade Colour BeigeAmber Viscosity/consistency Creamy Conditions for pH value 9.7 / 20°C
Content 150 ml Container Bomboletta aerosol Production storage time 24 months
Measures PHH Handle material Multicomponent plastic Handle length (B) 62 mm Blade length (A) 25 mm Length 87 mm
Temperature measurement range min/max -50 to 650 °C Temperature measurement range min -50 °C Max temperature measurement range 650 °C Thermometer measuring cone 12:1 Rated voltage 9 V/CC Spectral range min/max 8-14 μm Min spectral range 8 μm Max spectral area 14 μm Time reaction 150 ms Automatic...
Support material PE film Colour Black Length 10 m Width 50 mm Overall thickness 1.5 mm Working temperature min/max 5 to 40 °C Temperature resistance min/max -30 to 80 °C
Height (C) 245 mm Width (A) 560 mm Depth (B) 430 mm Material PE - Polyethylene Product weight (per piece) 8
Chemical base Monomer of etil-2-cyanoacrylate Colour Transparent Density 1,06 g/cm3 Viscosity min/max 90000-130000 mPas Conditions for hardening time min/max 20-100 s / Based on material Conditions for voltage resistance min/max 2-15 N/mm2 / according to DIN 53288 Tension resistance min/max 2-15N/mm2 Tension...
Content 400 ml Chemical base Synthetic resin Available colors Average grey Colour Average grey Working temperature 20 °C Drying time min 20 min Max drying time 60 min Conditions for drying time at 20°C Max coating thickness 50 μm Density 1,07 g/cm3 Spraying distance min 20 cm Density...
Chemical base Mineral oil Colour Light Brown Odore/profuse Perfume Density 0,71 g/cm3 Silicone Yes Without acids Yes Without resin Yes Content 50 ml Container Aerosol vent in display box Production storage time 24 months
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
Area of application Suitable for all types of surfaces such as:handles, handles, keyboards, tablets, cellphones, coins, steering wheel, gearbox, dashboards, hats, flat surfaces, shoes and glove It can also be used to hygienize the outside of the masks.In this case, it is recommended not to use the treated mask for a period of at least 5 hours
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColourFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50% relative...
Material Polytetrafluoroethylene Thickness 0.20 mm Width 19 mm Length 15 mm Temperature resistance min/max -200 to 260 °C
Main light luminous flux 1000 lm Bright side light flow 150 lm Color temperature 6000 K Autonomy min/max 2-10 h Duration of secondary light 9 h Charging time 4 h IP protection class IP 65 Lamp protection class Protection class III/low voltage safety protection Charger protection class Protection class...
Weight content 40 g Colour Red Odore/profuse Characteristic Temperature resistance max 80 °C PH value Slightly acidic Density 1,1 g/cm3 Density conditions at 20°C Hydrosoluble No Viscosity/consistency Pastry Viscosity 10000 mPas Conditions for viscosity at 20°C
Length 160 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Content 500 ml Colour Color Chemical base Aliphatic hydrocarbons Odore/profuse Citro Viscosity/consistency Ice cream Density 0,77 g/cm3 Point of flammability min 21 °C Danger class (Liquid fuel Ordinance, VbF) AI Conditions for shelf life from production 24 Months / storage in the environment sheltered...
Content 500 ml Weight content 460 g Chemical base Ethanol Odore/profuse Citro Colour Blue PH value 7.8 Conditions for PH value at 20°C Point of flammability min 21 °C Density 0,952 g/cm3 Density conditions at 20°C Production storage time 36 months Without AOX Yes Silicone Yes...
Medical device class - 93/42/EEC IIa MEDICAL PROVISIONS Ministry of Health Identified Registration BD/RDM: 1951667/R Type CND V030102
Protection lens color Transparent Protective lens material Polycarbonate EN Standard 166170 Mechanical resistance F (45m/s)
Content |
400 ml |
Odore/profuse |
Characteristic |
Chemical base |
Aliphatic hydrocarbons |
Density |
0,825 g/cm3 |
Point of flammability min |
62 °C |