

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Weight content |
960 g |
Content |
750 ml |
Chemical base |
Alkyd resin |
Colour |
Red Brown Brown |
Drying time |
16 h |
Density |
1,4 g/cm3 |
Density conditions |
at 20°C |
Production storage time |
12 months |
Storage conditions from production |
from 10°C to 35°C, away from heat sources and light so |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
VCE active protection against corrosion for metal surfaces applicable with brush Excellent corrosion protection Meets the requirements of the C3 "high" corrosion grade in accordance with DIN EN ISO 12944 Approximately 500 hours in accordance with DIN EN ISO 9227 Freshwater and salt water resistant and many chemical substances Quick drying The processed materials can be used and transported in fast times Ideal as transport coating in superstructure steel constructionsInstructions for use are recommendations based on the tests carried out and our experience;perform tests personally before each application.Due to the large number of applications and storage and usage conditions possible, all liability is declined for the result of specific applications.To the extent that our free customer service provides technical information or acts as an advisory service, it disclaims any liability, except where the advice or information provided falls within the scope of the contracted specified service or the consultant deliberately act.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further develop products.
Content 1000 ml Odore/profuse Grade Colour BeigeAmber Viscosity/consistency Creamy Conditions for pH value 9.7 / 20°C
Content 500 ml Container Bomboletta aerosol Odore/profuse Solvent, similar Colour Color Chemical base Aliphatic hydrocarbons Danger class (Liquid fuel Ordinance, VbF) AI Production storage time 24 months Without AOX Yes Silicone Yes
Length 140 mm Max cable diameter cutting capacity on aluminium/blade 10 mm Cutting capacity with cross section aluminum wire / max blade 35 mm2 Material Stainless steel Handle material Multicomponent plastic Product weight (per piece) 72 g
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
Chemical base Fats and synthesis additives in hydrocarbon solvents Basic oil Synthetic Oil / Mineral Combination Colour Optical green Odore/profuse Characteristic Density 0,78 g/cm3 Temperature conditions min -25 °C Maximum temperature conditions 150 °C Max temporary thermal resistance 175 °C...
Content 50 ml Chemical base Two-component polyurethane Working time 3.5 min Colour Black Density 1.225 g/cm3 Resistance to touch min. 30 min Filming time min 15 min Levigabile after 30 min Working temperature min/max 15 to 25 °C Temperature resistance min/max -30 to 100 °C Silicone Yes
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor TransparentFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Voltage range min/max CA 150-250 V/CA Cutting width 3 mm Blade length 60 mm Length 146 mm With clip and tip of the cut screwdriver According to DIN 57680, Part 6 and VDE 0680/6
Brightness levels Front light 450-50 lm Torches 225 lm
Main light luminous flux 1000 lm Bright side light flow 150 lm Color temperature 6000 K Autonomy min/max 2-10 h Duration of secondary light 9 h Charging time 4 h IP protection class IP 65 Lamp protection class Protection class III/low voltage safety protection Charger protection class Protection class...
Content 869.6 ml Odore/profuse Characteristic Weight content 970 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Yellowish Hardness supplement % Density 1,15 g/cm3 Max service life 15 min Useful period min 10 min Conditions for duration at 20°C...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,09 g/cm3 Viscosity min/max 1800-2200 mPas Conditions for hardening time min/max 10-60 s / Based on material Conditions for voltage resistance min/max 12-25 N/mm2 / according to DIN 53288 Tensile strength min./max. 12-25 N/mm2 Tension and...
Content 500 ml Container Hand spray Chemical base Anionic surfactants Odore/profuse Perfume Colour Green neon PH value 8.3 Density 1,011 g/cm3 Conditions for PH value at 20°C Density conditions at 20°C Weight content 506 g Production storage time 24 months Without AOX Yes...
Rated voltage 230 V/CA Frequency min/max 50 / 60 Hz Protection class Protection class II/protection insulation Absorbed power 1800 W Number of min/max vacuum turns 2300-5000 G/min Number of min/max laps at the nominal load 1400-4000 G/min For hole diameter 30 mm Max saw blade diameter 190 mm Cut angle...
Adhesive base Acrylic Support material Polyethylene foam Colour White Thickness 1 mm Breaking extension 150 % Adhesive force 25 mm 23N Temperature resistance min -40 °C Temperature resistance min/max -40 to 95 °C Max working temperature 40 °C Working temperature min/max 5 to 40 °C...
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Brown Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity Min...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,04 g/cm3 Viscosity min/max 320-420 mPas Elastic power % Max bonding slot size 0.15 mm Temperature resistance min/max -55 to 105 °C Working temperature min/max 5 to 35 °C Silicone Yes Without solvents Yes Conditions for...
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 5
Wire diameter (Ø) 3,25 mm Length 450 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Tensile strength min. 500 MPa Longitudinal extension min 20 %
Number of pieces in the assortment/kit 19 Quality ZEBRA-Premium Drilling / standard depth DIN 338 / 5xD Shape stem Cylinder Material subgroup Structural steel for general useNon-alloy hardened steelsGhisaIron ductsMalleable ironMagnesium alloysCopper, low tiedBrass, long chipBrass, short chipPlastics, hard plasticsPlastic,...
Colour White Container Morning Liquid physical state min 50 °C Liquid physical state max 120 °C Solid physical state min -10 °C Max solid physical state 50 °C Production storage time 36 months Weight content 750 g Product weight (per piece) 883 g
Number of pieces in the assortment/kit 29 PZ
Colour Blue Width 19 mm Length 25 m Thickness 0.15
Content 0.4 l Container Spray bottle Temperature conditions min -10 °C Maximum temperature conditions 140 °C Type of spraying head Cobra nozzle Production storage time 24 months
Width 19 mm Length 10 m Thickness 0,75 mm Dielectric resistance 44 kV/mm Temperature resistance min -40 °C Temperature resistance max 100
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Transparent Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity...
Content 400 ml Chemical base Synthetic oil with combination of multifunctional additives Colour Color Operating temperature min/max -50 to 210 °C Production storage time 24 months Temperature conditions min -50 °C Maximum temperature conditions 210 °C Point of flammability min 61 °C Silicone Yes...
Number of pieces in the assortment/kit 6 PZ
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Light grey (light gray) Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working...
Content 400 ml Chemical base Synthetic resin Available colors Average grey Colour Average grey Working temperature 20 °C Drying time min 20 min Max drying time 60 min Conditions for drying time at 20°C Max coating thickness 50 μm Density 1,07 g/cm3 Spraying distance min 20 cm Density...
Content 1 Production storage time 36 months Container Plastic bottle
Chemical base Exterior of dimetacrilic acid Colour Fluorescent green Density 1,11 g/cm3 Viscosity min/max 500-900 mPas Conditions for viscosity 25°C, Brookfield RVT, 2/20 rpm Max filling capacity 0.15 mm Point of flammability min 100 °C Min/max initial resistance 5-15 min Final resistance min/max 5...
Effective hand cleaner for multiple applications. Content 3 Odore/profuse Lemongrass Colour Green
Content 300 ml Colour Light yellow Odore/profuse Characteristic Production storage time 24 months Chemical base Mineral oil Density 0,743 g/cm3 Density conditions at 20°C
Dry lubrication, does not attract dust and dirt Chemical base:Polytetrafluoroethylene Color:White transparent milk (protection film) Density: 0.6 g/cm3 Odore/profume:Characteristic Temperature conditions min: -180 °C Temperature conditions max: 260 °C Boiling point:-44 °C VOC concentration (CH): 588.66 g/l
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Colour White Tensile strength min. 500 MPa Longitudinal extension min 2
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Temperature measurement range min/max -50 to 650 °C Temperature measurement range min -50 °C Max temperature measurement range 650 °C Thermometer measuring cone 12:1 Rated voltage 9 V/CC Spectral range min/max 8-14 μm Min spectral range 8 μm Max spectral area 14 μm Time reaction 150 ms Automatic...
Content 1500 ml Odore/profuse Characteristic Weight content 1500 g Chemical base Polyester Colour White Hardness supplement % Density 1,155 g/cm3 Density conditions at 20°C Max service life 4 min Useful period min 3 min Conditions for duration at 20°C Conditions for drying time at...
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Colour Yellow Width 19 mm Length 25 m Thickness 0.15 m
Weight content |
960 g |
Content |
750 ml |
Chemical base |
Alkyd resin |
Colour |
Red Brown Brown |
Drying time |
16 h |
Density |
1,4 g/cm3 |
Density conditions |
at 20°C |
Production storage time |
12 months |
Storage conditions from production |
from 10°C to 35°C, away from heat sources and light so |