

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Working temperature min |
-10 °C |
Max working temperature |
50 °C |
Production storage time |
36 months |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
Rubber and Plastic Electric Cable Lubricant
Facilitates the insertion of electric cables in forced tubes and ducts
Eliminates friction and makes the electric cable slide
Being chemically inert, it does not generate any reaction that damages insulation materials
Indication
You fear the frost!Avoid contact with marbles, carpets, parquettes, etc.The stains can be removed with common fabric smacchiatori
The technical advice given, although based on our best experience, is to be considered, in any case, purely indicative and must be confirmed by exhaustive practical tests.They therefore do not dispense the buyer from his own responsibility to personally try our products with regard to their suitability for the intended use
Instructions
Apply directly to the cable or sheath by helping with the hand, with a brush or other
Content 200 ml Colour Red Odore/profuse Characteristic Chemical base Mineral oil Production storage time 24 months Silicone No Density 0,76 g/cm3
Chemical base White oil with additives Solid lubricant Polytetrafluoroethylene Colour Transparent Density 0,739 g/cm3 Odore/profuse Characteristic Point of flammability min -80 °C Silicone Yes Without acids Yes Without resin Yes Without AOX Yes VOC concentration (CH) 89.56 % Content...
Content 0.5 l Container Bomboletta aerosol Colour Color Chemical base Nafta Conditions for density 0,715 g/cm3 / 20°C Danger class (Liquid fuel Ordinance, VbF) AI Production storage time 24 M
Content 4 Odore/profuse Lemongrass Colour White
Content 590 ml Odore/profuse Characteristic Weight content 970 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracites Hardness supplement % Density 1,858 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Content 200 ml Odore/profuse Characteristic Colour Color Production storage time 24 months
Length of sheet 300 mm Length (L) 530 mm Height 140 mm
Content 1 Weight content 1,02 kg Container Bottle spray Chemical base Alkaline surfactants Odore/profuse Fruit Colour Rose Conditions for pH value 10 / not diluted Conditions for density 1,14 g/cm3 / 20°C Production storage time 12 months Without AOX Yes Silicone Yes Biodegradable...
Chemical base Silicate sodium Content 310 ml Density 1.8 g/cm3 Colour Black Complete vulcanization speed 5 mm/g Temperature resistance min/max -20 to 1100 °C Working temperature min/max 5 to 35 °C Production storage time 12 months Storage conditions from production storage in a cool and dry place, from...
Height (C) 220 mm Width (A) 480 mm Depth (B) 408 mm Material Aluminium / polypropylene Product weight (per piece) 4600 g
Weight content 960 g Content 750 ml Chemical base Alkyd resin Colour Red Brown Brown Drying time 16 h Density 1,4 g/cm3 Density conditions at 20°C Production storage time 12 months Storage conditions from production from 10°C to 35°C, away from heat sources and light so
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 2-90 s / Based on material Conditions for voltage resistance min/max 0.01-0.01 N/mm2 / in accordance with DIN EN 1465, aluminium/aluminum, distance 0.2 mm, 20°C Tension resistance min/max 0.01-0,01...
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor TransparentFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Content 1 Production storage time 36 months Container Plastic bottle
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 5
Content 400 ml Chemical base Epoxy resin Weight content 330 g Colour Grey Density 0,82 g/ml Density conditions at 20°C VOC concentration (CH) 725 g/l Thickness coating min 20 μm Max coating thickness 60 μm Spraying distance min 15 cm Max nebulization distance 25 cm Working temperature...
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Black Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Chemical base Mineral oil Colour Light Brown Odore/profuse Perfume Density 0,71 g/cm3 Silicone Yes Without acids Yes Without resin Yes Content 50 ml Container Aerosol vent in display box Production storage time 24 months
Length 350 mm Current min/max 60-80A Rules ISO 2560, DIN 1913, UNI 5132 American Welding Society (AWS) A 5.1: E 7016 Tensile strength min. 510 N/mm2 Tenacity to min on test with V cut 80 J Current min 60 A Max current 80 A Longitudinal extension min 28 %
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Content 500 ml Weight content 515 g Chemical base Alkaline surfactants Odore/profuse Characteristic Colour YellowGreen PH value 11 Point of flammability min 350 °C Density 1,033 g/cm3 Density conditions at 20°C Production storage time 36 months Storage conditions from production storage in...
Colour Dark grey Odore/profuse Characteristic Temperature resistance min/max -30 to 100 °C Max temporary thermal resistance 150 °C Resistance against Water Conditions for shelf life from production 24 Months Removable/removable Additional, necessary preliminary test
WURTH DETERGENT FOR INDUSTRIAL LAVASTOVIGLIES PLUS NOT CONTENTS FOSFATIVES CONTENT 6KG ART. 08931605
Main light luminous flux 1000 lm Bright side light flow 150 lm Color temperature 6000 K Autonomy min/max 2-10 h Duration of secondary light 9 h Charging time 4 h IP protection class IP 65 Lamp protection class Protection class III/low voltage safety protection Charger protection class Protection class...
Area of application Car/cargo To eliminate damage due to paint, scratches and to close existing pores and irregular areas in the universal filling area. Metal Extremely fine surface treatment to ensure optimum finishing. Wood Ideal as a fine or universal stucco for all types of wood.Not suitable for oily wood types.Do not use on very ruined surfaces....
Content 400 ml Chemical base Polivinilbutir Colour Grey silver silver Max working temperature 40 °C Density 0,75 g/cm3 Temperature resistance max 300 °C Max temporary thermal resistance 500 °C VOC concentration (CH) 669 g/l Working temperature min 5 °C Production storage time 24 months
Colour Black Width 19 mm Length 25 m Thickness 0.15
Content 0.4 l Chemical base Mineral oil Colour Transparent light yellow Working temperature min/max for tank -10 to 40 °C Operating temperature min/max -30 to 130 °C Production storage time 24 months Min working temperature for tank -10 °C Type of spraying head Standard spray head Max treatment...
Material Polytetrafluoroethylene Weight per m2 60 g Thickness 0.1 mm Width 12 mm Length 12 m Approval mark DVGW Ideal for Fine filler with maximum nominal diameter 10 Temperature resistance min/max -240 to 240 °C Max pressure 25 bar Silicone Yes
Content 500 ml Weight content 460 g Chemical base Ethanol Odore/profuse Citro Colour Blue PH value 7.8 Conditions for PH value at 20°C Point of flammability min 21 °C Density 0,952 g/cm3 Density conditions at 20°C Production storage time 36 months Without AOX Yes Silicone Yes...
Content 1000 ml Odore/profuse Grade Colour BeigeAmber Viscosity/consistency Creamy Conditions for pH value 9.7 / 20°C
Height (C) 165 mm Width (A) 450 mm Depth (B) 395 mm Material Polypropylene - PP Product weight (per piece) 4500 g
Content 400 ml Container Bomboletta aerosol Production storage time 36 months
Support material Poliisobutilene Colour Black (basic material) Width 19 mm Working temperature min/max 5 to 35 °C Breaking extension 600 % Temperature resistance min/max -40 to 90 °C UV resistance Limited Moisturizer Yes Length 10 m Overall thickness 0.5 mm Dielectric resistance 40 kV/mm...
Content 250 ml Weight content 229 g Chemical base Water and ethanol Odore/profuse Perfume Colour Blue PH value 7 Point of flammability min 23 °C Density 0,969 g/cm3 Production storage time 36 months Without AOX Yes Silicone Yes Biodegradable Yes Container Tanics
Rated voltage 28 V/CC Thread type x thread diameter M14 Number of max vacuum turns 9000 G/min Max cutting disc diameter 125 mm Weight without rechargeable battery 1.8 kg Output power 500 W
Chemical base Synthetic rubber based on neoprene Colour Beige Density 0,86 g/cm3 Odore/profuse Characteristic Working temperature min/max 10 to 25 °C Temperature resistance min/max -20 to 80 °C Point of flammability min -60 °C Container Bomboletta aerosol Content 400 ml Production storage time 12...
Chemical base Water, soap, glycol Colour Blue Density 1 g/cm3 PH value 7 Working temperature min -10 °C Max working temperature 80 °C Biodegradable Yes Weight content 1 kg Production storage time 36 months
Length 145 mm Material Steel Handle material PLA Product weight (per piece) 102 g
Content 500 ml Colour Color Chemical base Aliphatic hydrocarbons Odore/profuse Citro Viscosity/consistency Ice cream Density 0,77 g/cm3 Point of flammability min 21 °C Danger class (Liquid fuel Ordinance, VbF) AI Conditions for shelf life from production 24 Months / storage in the environment sheltered...
Area of application Suitable for all types of surfaces such as:handles, handles, keyboards, tablets, cellphones, coins, steering wheel, gearbox, dashboards, hats, flat surfaces, shoes and glove It can also be used to hygienize the outside of the masks.In this case, it is recommended not to use the treated mask for a period of at least 5 hours
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Grey LeadFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Impronta 1/4 chicken. Number of pieces in the assortment/kit 10 PZ Height 81 mm
Line Thickness 1.5 mm Colour BLUE Version Permanent waterproof Shape tip Round table
Protection lens color Transparent Protective lens material Polycarbonate EN Standard 166170 Mechanical resistance F (45m/s)
Working temperature min |
-10 °C |
Max working temperature |
50 °C |
Production storage time |
36 months |