

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Container |
Bottle |
Colour |
White |
Working temperature min/max |
18 to 22 °C |
Conditions for opening time min/max |
7-9 min / 20°C |
Production storage time |
12 months |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
WURTH COLLA VINILICA BODENVINIL D3 FOR PARQUET OR LAMINATO ART.0892900050
For the gluing of the male and female recesses of parquet or laminate floors to be laid floating
For various gluing where moisture resistance is required Indication The technical advice shown, while relying on our best experience
are to be considered, in any case, purely indicative and must be confirmed by exhaustive practical evidence.
Container:Bottle Color:White Working temperature min/max:18 to 22 °C Conditions for opening time min/max:7-9 min / 20°C Conservability:12 months
Length of sheet 300 mm Length (L) 530 mm Height 140 mm
Content 310 ml Chemical base Neutral reticulation silicones, polymer base Colour Transparent Maximum working time 25 % Shore hardness A 25 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative...
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Grey Medium Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working temperature min...
Main light luminous flux 1000 lm Bright side light flow 150 lm Color temperature 6000 K Autonomy min/max 2-10 h Duration of secondary light 9 h Charging time 4 h IP protection class IP 65 Lamp protection class Protection class III/low voltage safety protection Charger protection class Protection class...
Measures PHHY Handle material Multicomponent plastic Handle length (B) 106 mm Blade length (A) 100 mm Length 206 mm
Content 400 ml Chemical base Epoxy resin Weight content 330 g Colour Grey Density 0,82 g/ml Density conditions at 20°C VOC concentration (CH) 725 g/l Thickness coating min 20 μm Max coating thickness 60 μm Spraying distance min 15 cm Max nebulization distance 25 cm Working temperature...
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColourFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50% relative...
Chemical base Mineral oil Basic oil Synthetic Colour Yellowish Odore/profuse Characteristic Density 0,773 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 170 °C Max temporary thermal resistance 200 °C Cinematic viscosity basic oil 2000 Basic...
Chemical base Synthetic rubber Colour Transparent Density 0,85 g/ml Odore/profuse Characteristic Working temperature min/max 0 to 30 °C Temperature resistance min/max -20 to 110 °C Point of flammability min -24 °C Min/max evaporation time 5 min-15 min Distance delivery min/max 15-25 cm Content...
Colour Red Width 19 mm Length 25 m Thickness 0.15 m
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Measures PZ2 Blade length 25 mm Length/width handle 62 / 31 mm
Length 300 mm Current min/max 70-110A Rules ISO 3581, DIN 8556 American Welding Society (AWS) A 5.4: AND 308L-16 Tensile strength min. 550 N/mm2 Tenacity to min on test with V cut 55 J Current min 70 A Max current 110 A Longitudinal extension min 35 %
Rated voltage 28 V/CC Thread type x thread diameter M14 Number of max vacuum turns 9000 G/min Max cutting disc diameter 125 mm Weight without rechargeable battery 1.8 kg Output power 500 W
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Light grey (light gray) Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working...
Weight content 198.75 g Production storage time 24 months Colour Color Content 250 ml
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Colour White Tensile strength min. 500 MPa Longitudinal extension min 2
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Chemical base Hydrocarbon Basic oil Synthetic mineral oil Colour Yellowish Odore/profuse Oil Density 0,742 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 180 °C Max temporary thermal resistance 200 °C Inflamability point of the active ingredient...
WURTH DETERGENT FOR INDUSTRIAL LAVASTOVIGLIES PLUS NOT CONTENTS FOSFATIVES CONTENT 6KG ART. 08931605
Content 0.4 l Chemical base Mineral oil Colour Transparent light yellow Working temperature min/max for tank -10 to 40 °C Operating temperature min/max -30 to 130 °C Production storage time 24 months Min working temperature for tank -10 °C Type of spraying head Standard spray head Max treatment...
Rated voltage 230 V/CA Frequency min/max 50 / 60 Hz Protection class Protection class II/protection insulation Absorbed power 1800 W Number of min/max vacuum turns 2300-5000 G/min Number of min/max laps at the nominal load 1400-4000 G/min For hole diameter 30 mm Max saw blade diameter 190 mm Cut angle...
Content 5 Production storage time 36 months Container Plastic sleeve
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Voltage range min/max CA 150-250 V/CA Cutting width 3 mm Blade length 60 mm Length 146 mm With clip and tip of the cut screwdriver According to DIN 57680, Part 6 and VDE 0680/6
Chemical base Alcohol with additives Odore/profuse Lemongrass Colour Transparent Content 50 ml Conditions for shelf life from production 24 Months / to 23°C and 50% relative humidity Viscosity/consistency Ice cream Conditions for pH value 6,0-7,5 / neutral Conditions for density 0,885 g/cm3 / 23°C
Content 200 ml Product weight (per piece) 210 g Odore/profuse Characteristic Colour Color Production storage time 24 months
Content 1 Product weight (per piece) 1122,444 g Container Bottle Biodegradable 90%
Content 50 ml Chemical base Two-component polyurethane Working time 3.5 min Colour Black Density 1.225 g/cm3 Resistance to touch min. 30 min Filming time min 15 min Levigabile after 30 min Working temperature min/max 15 to 25 °C Temperature resistance min/max -30 to 100 °C Silicone Yes
Chemical base Mineral oil Colour Light Brown Odore/profuse Perfume Density 0,71 g/cm3 Silicone Yes Without acids Yes Without resin Yes Content 50 ml Container Aerosol vent in display box Production storage time 24 months
Colour Red fire RAL 3000 Content 50 ml Conditions for density 0,99 g/cm3 / at 20°C, 50% relative humidity Resistance to touch min. 30 min Final resistance min/max 12 h-24 h Working temperature min/max 5 to 30 °C Temperature resistance min/max -40 to 145 °C Silicone Yes Without solvents Yes...
Chemical base Cyanoacrylate Colour Transparent Density 1,05 g/cm3 Conditions for hardening time min/max 4-20 s / Based on material Tension resistance min/max 0.1-0,1N/mm2 Elastic power % Working temperature min/max 7 to 40 °C Silicone Yes Without solvents Yes Conditions for shelf life from...
Impronta 1/4 chicken. Number of pieces in the assortment/kit 44 PZ Length 177 mm Width 110 mm Height 50 m
Impronta 1/4 chicken. Number of pieces in the assortment/kit 10 PZ Height 81 mm
Content 400 ml Container Bomboletta aerosol Production storage time 36 months
Content 200 ml Product weight (per piece) 242 g Colour White Production storage time 24 months
Length 140 mm Max cable diameter cutting capacity on aluminium/blade 10 mm Cutting capacity with cross section aluminum wire / max blade 35 mm2 Material Stainless steel Handle material Multicomponent plastic Product weight (per piece) 72 g
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Area of application Suitable for all types of surfaces such as:handles, handles, keyboards, tablets, cellphones, coins, steering wheel, gearbox, dashboards, hats, flat surfaces, shoes and glove It can also be used to hygienize the outside of the masks.In this case, it is recommended not to use the treated mask for a period of at least 5 hours
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Black Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Support material PE film Colour Black Length 10 m Width 50 mm Overall thickness 1.5 mm Working temperature min/max 5 to 40 °C Temperature resistance min/max -30 to 80 °C
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
Content 150 ml Colour Color Chemical base Propane Conditions for density 0,69 g/cm3 / 20°C Production storage time 24 months
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 5
Area of application For the gluing of mirrors (also on vertical surfaces).Ideal for furniture, sanitary ware, wood and glass. Instructions When applying the material, make sure the working environment is clean.It is essential to use the product with the components of the Würth system supplied to ensure a correct and impeccable work.
Container |
Bottle |
Colour |
White |
Working temperature min/max |
18 to 22 °C |
Conditions for opening time min/max |
7-9 min / 20°C |
Production storage time |
12 months |