

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Content |
310 ml |
Chemical base |
Neutral reticulation silicones, polymer base |
Colour |
Transparent |
Maximum working time |
25 % |
Shore hardness A |
25 |
Working temperature min/max |
5 to 40 °C |
Temperature resistance min/max |
-50 to 200 °C |
Filming time min |
20 min |
Conditions for filming time |
to 23°C and 50% relative humidity |
Min break extension |
170 % |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
WURTH HEALTHY SILICONE TRANSPARENT SEAL 310ML ART. 08901711
Acetic reticulation silicone sealing with fungistatic agents specific to the healthcare sector Application area
Waterproof sealing of fitting joints in the bathroom premises,For antimicrobial and fungistatic protection of the reticulated sealant
It maintains a good hygienic/ethical effect of sealed areas
Uniform and permanent elasticity over time uniform and permanent elasticity over time does not degrade in contact with sanitary cleaners
of stable common use to contact with boiling water excellent resistance to water and atmospheric agents Indication Dimensionation of joint:
The product is not suitable for structural bonding e.g.structural facades (Structural Glanzing).
Given the variety of paints and paints we recommend to carry out compatibility tests to exclude unwanted reactions.
Given the large number of materials used, preliminary tests are always necessary.
It does not adhere to plastics such as PTFE, PE and PP) Limitations in use acetic acid emitted by silicone during reticulation can lead to corrosion
of untreated metal surfaces not suitable for the construction of aquariums tends to yellow in contact with UV rays
can stain surfaces of natural stones and marbles It is not overpaintable,
During hardening the sealing mass frees a small amount of acetic acid that can irritate the eyes and muscous.
Aerate the working environment well.In case of accidental contact with eyes, rinse thoroughly with water and consult your doctor
Length of sheet 300 mm Length (L) 530 mm Height 140 mm
Content 4000 ml Odore/profuse Grade Colour BeigeAmber Viscosity/consistency Creamy Conditions for pH value 9.7 / 20°C
Length 100 mm Diameter 2,8 mm Thickness line min/max 0.5-2.8 mm Colour Grey
Adhesive base Acrylic Support material Polyethylene foam Colour White Thickness 1 mm Breaking extension 150 % Adhesive force 25 mm 23N Temperature resistance min -40 °C Temperature resistance min/max -40 to 95 °C Max working temperature 40 °C Working temperature min/max 5 to 40 °C...
Content 1 Product weight (per piece) 1122,444 g Container Bottle Biodegradable 90%
WURTH DETERGENT FORNI AND GRILL ACTION PULENT AND DISINCRISTANT 5KG ART. 08931602
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 2-90 s / Based on material Conditions for voltage resistance min/max 0.01-0.01 N/mm2 / in accordance with DIN EN 1465, aluminium/aluminum, distance 0.2 mm, 20°C Tension resistance min/max 0.01-0,01...
Measures PHY Handle material Multicomponent plastic Handle length (B) 120 mm Blade length (A) 200 mm Length 320 mm
Boiling point 110 °C Product weight (per piece) 1167,056 g Colour Blue Chemical base Ethylene glycol Content 1
Wire diameter (Ø) 3,25 mm Length 450 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Tensile strength min. 500 MPa Longitudinal extension min 20 %
Material Polytetrafluoroethylene Colour White Length 175 m Operating temperature min/max -200 to 240 °C
Content 150 ml Colour Color Chemical base Propane Conditions for density 0,69 g/cm3 / 20°C Production storage time 24 months
Content 0.4 l Container Spray bottle Temperature conditions min -10 °C Maximum temperature conditions 140 °C Type of spraying head Cobra nozzle Production storage time 24 months
Chemical base Cyanoacrylate Colour Transparent Density 1,05 g/cm3 Conditions for hardening time min/max 4-20 s / Based on material Tension resistance min/max 0.1-0,1N/mm2 Elastic power % Working temperature min/max 7 to 40 °C Silicone Yes Without solvents Yes Conditions for shelf life from...
Content 400 ml Chemical base Epoxy resin Weight content 330 g Colour Grey Density 0,82 g/ml Density conditions at 20°C VOC concentration (CH) 725 g/l Thickness coating min 20 μm Max coating thickness 60 μm Spraying distance min 15 cm Max nebulization distance 25 cm Working temperature...
Material PE - Polyethylene Colour Red/white Width 70 mm Length 200 m
Content 4 Odore/profuse Lemongrass Colour White
Content 5000 ml Colour White
Content 1 Production storage time 36 months Container Plastic bottle
Protection lens color Transparent Protective lens material Polycarbonate EN Standard 166170 Mechanical resistance F (45m/s)
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,09 g/cm3 Viscosity min/max 1800-2200 mPas Conditions for hardening time min/max 10-60 s / Based on material Conditions for voltage resistance min/max 12-25 N/mm2 / according to DIN 53288 Tensile strength min./max. 12-25 N/mm2 Tension and...
Colour Black Width 19 mm Length 25 m Thickness 0.15
Content 500 ml Container Morning Chemical base Isopropanol Conditions for density 0.9 g/cm3 / 23°C, 50% relative humidity Production storage time 24 months
Measures PHH Handle material Multicomponent plastic Handle length (B) 96 mm Blade length (A) 80 mm Length 176 mm
Width 220 mm Height 220 mm Length 220 mm Colour Black
Chemical base White oil with additives Solid lubricant Polytetrafluoroethylene Colour Transparent Density 0,739 g/cm3 Odore/profuse Characteristic Point of flammability min -80 °C Silicone Yes Without acids Yes Without resin Yes Without AOX Yes VOC concentration (CH) 89.56 % Content...
Number of pieces in the assortment/kit 8 PZ Key opening 6 x 7 mm8 x 9 mm10 x 11 mm12 x 13 mm14 x 15 mm16 x 17 mm18 x 19 mm20 x 22 mm Product weight (per piece) 1206
Type of tip Internal recessed hexagon Included Content mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Number of pieces in the assortment/kit 9
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Content 0.4 l Chemical base Mineral oil Colour Transparent light yellow Working temperature min/max for tank -10 to 40 °C Operating temperature min/max -30 to 130 °C Production storage time 24 months Min working temperature for tank -10 °C Type of spraying head Standard spray head Max treatment...
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Content 500 ml Weight content 570 g Container Bottle spray Chemical base Phosphoric acid, non-ionic surfactants Odore/profuse Characteristic Colour Color Conditions for pH value 1 / 20°C Point of flammability min 38 °C Conditions for density 1,14 g/cm3 / 20°C Production storage time 24 months...
Number of pieces in the assortment/kit 13 PZ
Colour White Width 19 mm Length 25 m Thickness 0.15 mm
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Chemical base Mineral oil Basic oil Synthetic Colour Yellowish Odore/profuse Characteristic Density 0,773 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 170 °C Max temporary thermal resistance 200 °C Cinematic viscosity basic oil 2000 Basic...
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Black Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Chemical base Cyanoacrylate Colour Transparent Density 1,21 g/cm3 Conditions for hardening time min/max 5-6 min / depending on the adhesive gap Conditions for voltage resistance min/max 4-7N/mm2 / ASTM D-412 compliant Tension resistance min/max 4-7N/mm2 Tension and cut resistance combined min 2N/mm2 Max...
Roll width 19 mm Roll length 3 m Thickness 0.5 mm Temperature resistance min/max -40 to 150 °C Max temporary thermal resistance 200 °C Breaking extension 800 %
Number of pieces in the assortment/kit 7 Version Without head
Content 500 ml Weight content 573 g Chemical base Anionic surfactants Colour Color PH value 10 Density 1,035 g/cm3 Density conditions at 20°C Production storage time 24 months Storage conditions from production from 15°C to 25°C Without AOX Yes Silicone Yes Biodegradable Yes...
Chemical base Hydrocarbon Basic oil Synthetic mineral oil Colour Yellowish Odore/profuse Oil Density 0,742 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 180 °C Max temporary thermal resistance 200 °C Inflamability point of the active ingredient...
Content |
310 ml |
Chemical base |
Neutral reticulation silicones, polymer base |
Colour |
Transparent |
Maximum working time |
25 % |
Shore hardness A |
25 |
Working temperature min/max |
5 to 40 °C |
Temperature resistance min/max |
-50 to 200 °C |
Filming time min |
20 min |
Conditions for filming time |
to 23°C and 50% relative humidity |
Min break extension |
170 % |