Price
€18.00
Out-of-Stock
- There are no more items in your cart
- Shipping
- Total €0.00
Price
€8.60
Available
FAAC REPLACEMENT PLASTIC CONTAINER FOR BUILT-IN PHOTOSWITCH PHOTOCELLS COD.7203115
INCASSO COD.7203115
Price
€6.90
Last items in stock
Reference: D571053
1 MT CVZ GALVANIZED STEEL RACK COMPLETE WITH SCREWS
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Price
€14.00
Available
-
Banner
WURTH PRIMER FOR PLASTIC 4K PLUS QUATTRO GRAY 400ML ART. 5867000503
|
Content |
400 ml |
|
Chemical base |
Epoxy resin |
|
Weight content |
330 g |
|
Colour |
Grey |
|
Density |
0,82 g/ml |
|
Density conditions |
at 20°C |
|
VOC concentration (CH) |
725 g/l |
|
Thickness coating min |
20 μm |
|
Max coating thickness |
60 μm |
|
Spraying distance min |
15 cm |
|
Max nebulization distance |
25 cm |
|
Working temperature min |
5 °C |
|
Max working temperature |
50 °C |
|
Conditions for application |
to 23°C |
|
Lead free |
Yes |
|
Production storage time |
36 months |
|
Without acids |
Yes |
|
Without chlorine |
Yes |
|
Silicone |
Yes |
|
Conditions for drying time |
to 23°C and 50% relative humidity |
|
Drying time min |
30 min |
|
Max drying time |
24 h |
|
Proportion of max solids |
30 |
Security policies
Secure site in SSL certification for the security of your data
Shipping policies
Shipping in 24/48 hours after payment
Return policy
Maximum times for returns 14 days, the goods must return as shipped by us,
Description
WURTH PRIMER FOR PLASTIC 4K PLUS QUATTRO GRIGIO 400ML ART. 5867000503
Primer and bottom for plastic components, compatible with all solvent resistant plastics
The plastic primer is comparable to standard coatings.Its advantage lies in reducing the effort needed to prepare the surface.It is not necessary to pretreat the surface.The classic pre-treatments for plastic surfaces (cartage, heating, etc.) are not necessary.The surface should be clean, dry and fat-free.
Indication
Due to the number of plastics available on the market, a compatibility test must be carried out in a less visible area.
Instructions for use are test-based recommendations and our experience;we recommend performing appropriate tests before each application.Due to the wide range of applications and storage and usage conditions possible, all liability is declined for the result of specific applications.To the extent that our free customer service provides technical information or acts as an advisory service, it disclaims any liability, except where the advice or information provided falls within the scope of the contracted specified service or the consultant deliberately act.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further improve the products.
It can be used for treating and repairing small damages on bumpers, spoilers, rearview mirror caps and various plastic parts of the vehicle.
-
- It adheres to surfaces without problems
-
- For a wide variety of plastics
-
- Pretreatment no longer necessary
-
- Short drying time
-
- Excellent coverage
-
- Overpainting after short period
- Solvent-based
Product Details
48 other products in the same category:
WURTH ANTI-RUST ROSTSTOP PRIMER ROSTSTOP FONDO LIGHT GRAY 400 ML ART. 0893211103
Content 400 ml Chemical base Epoxy resin Colour White grey Drying time 25 min Density 0,83 g/cm3 VOC concentration (CH) 83.5 % Production storage time 24 months
Price
€26.84
In stock
WURTH SINGLE-COMPONENT ACID PRIMER 1K 400ML ART. 0893211103
Content 400 ml Chemical base Synthetic resin Available colors Average grey Colour Average grey Working temperature 20 °C Drying time min 20 min Max drying time 60 min Conditions for drying time at 20°C Max coating thickness 50 μm Density 1,07 g/cm3 Spraying distance min 20 cm Density...
Price
€26.84
In stock
Price
€23.18
In stock
WURTH SILICONE A8 PRO NEUTRAL FOR WMP WINDOW BROWN 310ML ART. 0892853324
CartridgeContents 310 mlChemical base Neutral joints, alcox base (alcohol base)Fungic properties NoColor Light BrownFilming time min 15 minMaximum working time 25 %Density 1,01 g/cm3Odore/profuse CharacteristicMin/max film conditions 15-40 min / 23°C and 50% relative humidityComplete vulcanization speed conditions 2 mm/g / 23°C and 50%...
Price
€12.20
In stock
WURTH INSULATION GEL FOR ELECTRICAL CONNECTIONS ISOGEL ART. 0975380030
Chemical base Neutral joints, ossimical base Density 1 g/cm3 Colour Transparent Quantity weight/volume application 1 kg/dm3 Production storage time 12 months Product weight (per piece) 1000 g Weight content 1000 g
Price
€86.62
In stock
WURTH PORTABLE RECHARGEABLE LED LAMP WLH 1.2 ART. 0827940112
Main light luminous flux 100 lm Bright side light flow 15 lm Autonomy Lamp 3 h Duration of secondary light 24 h Charging time 2.5 h Protection class IP, lamp IP 20 IP protection type charger IP 20 Impact resistance IK07 Lamp protection class Protection class III/low voltage safety protection...
Price
€56.12
In stock
WURTH COMBI CIRCULAR SAW HKS55 COMBI MASTER ART. 07021570
Rated voltage 230 V/CA Frequency min/max 50 / 60 Hz Protection class Protection class II/protection insulation Absorbed power 1200 W Number of min/max vacuum turns 2000-5200 G/min For hole diameter 20 mm Max saw blade diameter 160 mm Cut angle min/max 0-45 Degrees Max cutting depth at 90° 55 mm Max...
Price
€723.46
Last items in stock
WURTH HIGH PERFORMANCE CRYSTAL CLEAR DOUBLE-SIDED SIDED TAPE 19MMX3M ART. 089490919
Roll width 19 mm Roll length 3 m Thickness 0.5 mm Temperature resistance min/max -40 to 150 °C Max temporary thermal resistance 200 °C Breaking extension 800 %
Price
€37.82
In stock
WURTH DRY LUBRICANT SPRAY PTFE 300ML ART. 0893550
Dry lubrication, does not attract dust and dirt Chemical base:Polytetrafluoroethylene Color:White transparent milk (protection film) Density: 0.6 g/cm3 Odore/profume:Characteristic Temperature conditions min: -180 °C Temperature conditions max: 260 °C Boiling point:-44 °C VOC concentration (CH): 588.66 g/l
Price
€39.04
In stock
WURTH PUTTY VAKU 50 ELASTIC PUTTY FOR CONTOURS, IN PARTICULAR FOR PAINTABLE PLASTIC PARTS ART. 089260501
Content 590 ml Odore/profuse Characteristic Weight content 970 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracites Hardness supplement % Density 1,858 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Price
€40.26
In stock
WURTH POLYPROPYLENE TOOL HOLDER TECHNICAL ASSISTANCE CASE 450X395X165MM COD. ART. 071593037
Height (C) 165 mm Width (A) 450 mm Depth (B) 395 mm Material Polypropylene - PP Product weight (per piece) 4500 g
Price
€234.24
In stock
WURTH STAINLESS STEEL SCISSORS WITH WIRE STRIPPER POCKET LENGTH 160mm ART. 0714036326
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Price
€37.82
In stock
WURTH BOW FOR / BLADES BOW SAW IN METAL ZEBRA ART. 0695552892
Length of sheet 300 mm Length (L) 530 mm Height 140 mm
Price
€30.50
In stock
WURTH PRIMER ANTI-RUST ROSTSTOP QUATTRO 400ML ART. 08932141
Content 400 ml Chemical base Polivinilbutir Colour Grey silver silver Max working temperature 40 °C Density 0,75 g/cm3 Temperature resistance max 300 °C Max temporary thermal resistance 500 °C VOC concentration (CH) 669 g/l Working temperature min 5 °C Production storage time 24 months
Price
€43.92
In stock
WURTH WELDING ELECTRODE RUTILE GREEN TIP (2,0 X300 400PCS.) ART. 09820012
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Price
€103.70
In stock
WURTH BASIC WHITE ALKALINE WELDING ELECTRODE (2,5 X300 250PCS.) LUNG.300MM. ART. 0982003025
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Colour White Tensile strength min. 500 MPa Longitudinal extension min 2
Price
€82.96
In stock
WURTH ANTIFREEZE FOR RADIATOR DILUTED RED READY TO USE 5L ART. 0892332743
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 5
Price
€100.04
In stock
WURTH STRUCTURAL ADHESIVE BOND+SEAL PASTE/SEAL GRAY 300ML ART. 08901002
Content 300 ml Container Cartridge Chemical base Monocomponent polyurethane Colour Grey Density 1,25 g/cm3 Filming time min/max 45-60 min Min/max film conditions 45-60 min / 23°C and 50% relative humidity Complete vulcanization speed conditions 3 mm/g / 23°C and 50% relative humidity, igroindurent Shore...
Price
€13.42
In stock
WURTH GLISS CABLE SLIDE FOAM FOR ELECTRIC CABLES 400ML ART. 0893750120
Chemical base Water, soap, glycol Colour White Density 1 g/l PH value 8 Working temperature min 1 °C Max working temperature 50 °C Biodegradable 95% Weight content 400 g Container Spray bottle
Price
€21.95
In stock
WURTH SANITARY TRANSPARENT SILICONE SEALANT 310ML ART. 08901711
Content 310 ml Chemical base Neutral reticulation silicones, polymer base Colour Transparent Maximum working time 25 % Shore hardness A 25 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative...
Price
€14.64
In stock
WURTH INTERIOR CLEANER CABIN CLEANER 500ML ART. 08930333
Content 500 ml Container Morning Chemical base Isopropanol Conditions for density 0.9 g/cm3 / 23°C, 50% relative humidity Production storage time 24 months
Price
€21.96
In stock
WURTH WHITE MINERAL HAND WASHING CREAM ANTIMICROBIAL SANITIZER 5L ART. 1999509670
Content 5000 ml Colour White
Price
€41.48
In stock
WURTH WINDOW WASHER DETERGENT -20°C WINDOW WASHER 250ML ART. 0892336250
Content 250 ml Weight content 229 g Chemical base Water and ethanol Odore/profuse Perfume Colour Blue PH value 7 Point of flammability min 23 °C Density 0,969 g/cm3 Production storage time 36 months Without AOX Yes Silicone Yes Biodegradable Yes Container Tanics
Price
€114.68
In stock
WURTH THREE-COMPONENT CUTTER FOR BREAKING BLADE CUTTER BLADE BLOCK-3C-LENGTH-170MM-BLADE-18MM ART. 071566 277
Blade width 18 mm Length 170 mm
Price
€19.52
In stock
WURTH SCREWDRIVER WITH CROSS CARVED PCS SHORT ROUND BLADE ZEBRA PZD2 ART. 06132532
Measures PZ2 Blade length 25 mm Length/width handle 62 / 31 mm
Price
€20.74
In stock
WURTH A2 STAINLESS STEEL ELECTRODE FOR WELDING 2,5 X 300 100PCS ART. 098200525
Length 300 mm Current min/max 70-110A Rules ISO 3581, DIN 8556 American Welding Society (AWS) A 5.4: AND 308L-16 Tensile strength min. 550 N/mm2 Tenacity to min on test with V cut 55 J Current min 70 A Max current 110 A Longitudinal extension min 35 %
Price
€154.94
In stock
WURTH ULTRA-FAST CYAN ACRYLATE INSTANT ADHESIVE STRUCTURAL SUPER-RAPID KLEBFIX 20G ART. 089309
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
Price
€23.18
In stock
WURTH SET OF CORNER SLIDING ALLEN KEYS SHORT 9 PCS ART. 071531100
Type of tip Internal recessed hexagon Included Content mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Number of pieces in the assortment/kit 9
Price
€15.86
In stock
WURTH RAPID VINYL GLUE FOR WOOD FOR COLD BONDING OF SOLID WOOD AND WOOD COMPOUNDS 500 GR 089210031
Container Bottle Weight content 500 g Colour WhiteTransparent Chemical base Polyvinyl acetate dispersion PH value 6.25 +/- 0.25 Viscosity 13500 mPas Conditions for viscosity to 23°C Density 1,08 kg/l Min film formation temperature 0 °C Production storage time 12 months Relative humidity wood...
Price
€29.28
In stock
WURTH COMPRESSED AIR SPRAY 200ML ART. 0893620200
Content 200 ml Colour Color Chemical base Tetrafluoropropane Production storage time 36 months Density 1,18 g/ml Density conditions at 20°C
Price
€39.04
In stock
WURTH CABIN SANITIZER SPRAY 200ML ART. 0890900008
Content 200 ml Odore/profuse Characteristic Colour Color Production storage time 24 months
Price
€14.64
In stock
WURTH FOUNDATION FILLER MEDIUM GRAY SPRAY 400ML. ART. 0893211102
Content 400 ml Colour Grey Medium Drying time 20 min VOC concentration (CH) 742,8 g/l Production storage time 60 months
Price
€25.62
In stock
WURTH SILICONE FLUID SPRAY EXCELLENT LUBRICANT AND ANTI-FRICTION PROPERTIES HIGH QUALITY 0.4 L ART. 0893221000
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
Price
€28.06
Last items in stock
WURTH SUPER FAST GLUE KLEBFIX EASY PEN STRUCTURAL ADHESIVE CYAN ACRYLATE 30G. ART. 0893090030
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 2-90 s / Based on material Conditions for voltage resistance min/max 0.01-0.01 N/mm2 / in accordance with DIN EN 1465, aluminium/aluminum, distance 0.2 mm, 20°C Tension resistance min/max 0.01-0,01...
Price
€32.94
In stock
WURTH ACETIC SILICONE PERMANENTLY ELASTIC SILICONE SEALANT FOR HIGH PERFORMANCE 310 ML TRANSPARENT 0890171
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Transparent Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity...
Price
€9.76
In stock
WURTH TAPE SEALING THREADS IN PFTE SEALING TAPE. IN PTFE 12X12X0,10 ART. 0985030160
Material Polytetrafluoroethylene Weight per m2 60 g Thickness 0.1 mm Width 12 mm Length 12 m Approval mark DVGW Ideal for Fine filler with maximum nominal diameter 10 Temperature resistance min/max -240 to 240 °C Max pressure 25 bar Silicone Yes
Price
€20.74
In stock
WURTH FOAM CLEANER FOR GLASSES AND CRYSTALS SPRAY 200ML ART. 0890900005
Content 200 ml Product weight (per piece) 242 g Colour White Production storage time 24 months
Price
€8.54
Last items in stock
WURTH HIGH QUALITY PVC INSULATION TAPE 10 PCS. IMQ BLACK 19MMX25M ART. 098550019
Colour Black Width 19 mm Length 25 m Thickness 0.15
Price
€18.30
In stock
Price
€41.48
In stock
WURTH BIT 105 PCS OF 1/4" COMPLETE WITH ALMOST ALL THE STANDARD AND SAFETY BITS SHORT AND LONG VERSION ART. 0614250300
Content:105 pieces 14 TX inserts with hole 9 TX PH inserts 8 hexagonal inserts 7 hexagonal PZ inserts with hole 6 Tri-wing 2-point inserts 5 AW cut inserts 4 inch hexagonal inserts, multi-dent, XZN Ribe, squares 3 inserts each size Torq, Clutch, 5-point star with hole 1 hook screw 1 adapter for inserts 1 magnetic insert holder
Price
€176.90
In stock
WURTH SUPERRAPID STRUCTURAL ADHESIVE KLEBFIX 4 IN 1 50G ART. 0893423
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,09 g/cm3 Viscosity min/max 1800-2200 mPas Conditions for hardening time min/max 10-60 s / Based on material Conditions for voltage resistance min/max 12-25 N/mm2 / according to DIN 53288 Tensile strength min./max. 12-25 N/mm2 Tension and...
Price
€48.80
In stock
WURTH SET OF FOLDING ANGLED ALLEN KEYS RECESSED 7 PCS IN BUNCH ZEBRA ART. 07153170
Number of pieces in the assortment/kit 7 Version Without head
Price
€37.82
In stock
WURTH INFRARED LASER THERMOMETER ART. 071553 110
Temperature measurement range min/max -50 to 650 °C Temperature measurement range min -50 °C Max temperature measurement range 650 °C Thermometer measuring cone 12:1 Rated voltage 9 V/CC Spectral range min/max 8-14 μm Min spectral range 8 μm Max spectral area 14 μm Time reaction 150 ms Automatic...
Price
€198.86
In stock
WURTH GRAPHITE LEAD FOR MARKERS 2,8 MM ART. 0967911210
Length 100 mm Diameter 2,8 mm Thickness line min/max 0.5-2.8 mm Colour Grey
Price
€21.96
In stock
WURTH MULTICLEAN LIQUID DETERGENT MULTIPURPOSE CLEANER 400ML ART. 08901096
Content 400 ml Odore/profuse Characteristic Colour Color Chemical base Aliphatic hydrocarbons Conditions for density 0,78 g/cm3 / Active ingredient, 20°C Point of flammability min 40 °C Without acetone Yes Silicone Yes Without AOX Yes
Price
€26.84
In stock
WURTH SERIES WRENCHES WITH DOUBLE PORTS ASS. FIXED WRENCHES 2 PORTS ZEBRA 12PCS ART. 071330443
Number of pieces in the assortment/kit 12 PZ Key opening 6 x 7 mm8 x 9 mm10 x 11 mm12 x 13 mm14 x 15 mm16 x 17 mm18 x 19 mm20 x 22 mm21 x 23 mm24 x 27 mm25 x 28 mm30 x 32
Price
€158.60
In stock
WURTH CROSS-SLOTTED SCREWDRIVER (PZ) SHORT ROUND BLADE ZEBRA PZD1 ART. 06132531
Measures PZ1 Blade length 25 mm Length/width handle 62 / 31 mm
Price
€20.74
In stock
WURTH BODENVINIL D3 VINYL GLUE FOR WOODEN PARQUET OR LAMINATE FLOORS ART.0892900050
Container Bottle Colour White Working temperature min/max 18 to 22 °C Conditions for opening time min/max 7-9 min / 20°C Production storage time 12 months
Price
€56.12
In stock
|
Content |
400 ml |
|
Chemical base |
Epoxy resin |
|
Weight content |
330 g |
|
Colour |
Grey |
|
Density |
0,82 g/ml |
|
Density conditions |
at 20°C |
|
VOC concentration (CH) |
725 g/l |
|
Thickness coating min |
20 μm |
|
Max coating thickness |
60 μm |
|
Spraying distance min |
15 cm |
|
Max nebulization distance |
25 cm |
|
Working temperature min |
5 °C |
|
Max working temperature |
50 °C |
|
Conditions for application |
to 23°C |
|
Lead free |
Yes |
|
Production storage time |
36 months |
|
Without acids |
Yes |
|
Without chlorine |
Yes |
|
Silicone |
Yes |
|
Conditions for drying time |
to 23°C and 50% relative humidity |
|
Drying time min |
30 min |
|
Max drying time |
24 h |
|
Proportion of max solids |
30 |