

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Chemical base |
White oil with additives |
Solid lubricant |
Polytetrafluoroethylene |
Colour |
Transparent |
Density |
0,739 g/cm3 |
Odore/profuse |
Characteristic |
Point of flammability min |
-80 °C |
Silicone |
Yes |
Without acids |
Yes |
Without resin |
Yes |
Without AOX |
Yes |
VOC concentration (CH) |
89.56 % |
Content |
300 ml |
Container |
Bomboletta aerosol |
Production storage time |
24 M |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
Protects and maintains plastic and rubber parts on vehicles, technical equipment and in the house Lubricating film for the care of completely synthetic materials;no contamination of clothing in the event of contact No adhesion or dust adherence Anti-slip protection against friction and noise Eliminates cygolides and cracks resistant by plastic materials (changers) Effective and lasting protection Eliminates water and moisture Does not deteriorate, does not create lumps, does not become stickyInstructions for use are recommendations based on the tests we have carried out and our experiences;run tests before each application.Due to the high variety of applications, storage conditions and since it is not possible to control the application, use or processing of products, any liability is declined.We accept all liability for any technical information or consultancy provided free of charge by our customer service.Therefore, before using the product, who intends to use it is required to determine whether or not it is suitable for the intended use and, in any case, assumes any responsibility that may arise from its use.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further develop products.
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Grey Medium Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working temperature min...
Line Thickness 1 mm Colour Black Version Permanent waterproof Shape tip Round table Carcase material Plastic Silicone No
Content 400 ml Chemical base Epoxy resin Colour White grey Drying time 25 min Density 0,83 g/cm3 VOC concentration (CH) 83.5 % Production storage time 24 months
Content 400 ml Chemical base Nitro alchid Colour Zinc, clear Vulcanization time min 1 h Complete hardening/vulcanization conditions 20°C Volcanic time max 1 h Resistance to saline fog test 500 h Temperature resistance max 200 °C Time out of dust 10 min Dry layer thickness (first longitudinal...
Impronta 1/4 chicken. Number of pieces in the assortment/kit 10 PZ Height 81 mm
Chemical base Water, soap, glycol Colour Blue Density 1 g/cm3 PH value 7 Working temperature min -10 °C Max working temperature 80 °C Biodegradable Yes Weight content 1 kg Production storage time 36 months
Content 400 ml Odore/profuse Characteristic Colour Color Chemical base Aliphatic hydrocarbons Conditions for density 0,78 g/cm3 / Active ingredient, 20°C Point of flammability min 40 °C Without acetone Yes Silicone Yes Without AOX Yes
Material Polytetrafluoroethylene Thickness 0.20 mm Width 19 mm Length 15 mm Temperature resistance min/max -200 to 260 °C
Content 200 ml Colour Color Chemical base Tetrafluoropropane Production storage time 36 months Density 1,18 g/ml Density conditions at 20°C
Measures PZ2 Blade length 25 mm Length/width handle 62 / 31 mm
Colour White Width 19 mm Length 25 m Thickness 0.15 mm
Adhesive base Acrylic Support material Polyethylene foam Colour White Thickness 1 mm Breaking extension 150 % Adhesive force 25 mm 23N Temperature resistance min -40 °C Temperature resistance min/max -40 to 95 °C Max working temperature 40 °C Working temperature min/max 5 to 40 °C...
Number of pieces in the assortment/kit 29 PZ
Rated voltage 28 V/CC Thread type x thread diameter M14 Number of max vacuum turns 9000 G/min Max cutting disc diameter 125 mm Weight without rechargeable battery 1.8 kg Output power 500 W
Brightness levels Front light 450-50 lm Torches 225 lm
Measures PHHY Handle material Multicomponent plastic Handle length (B) 114 mm Blade length (A) 150 mm Length 264 mm
Content 500 ml Container Bottle Odore/profuse Perfume Colour Green Chemical base Water with surfactants PH value 7,5 Conditions for density 1,036 g/cm3 / 20°C Point of flammability min 100 °C Biodegradable Yes Without AOX Yes Silicone Yes
Support material Silicone Colour Black Width 25 mm Working temperature min/max -50 to 260 °C Breaking extension 300 % Temperature resistance min/max -60 to 260 °C UV resistance Yes Moisturizer Yes Length 3,65 m Overall thickness 0.5 mm Dielectric resistance 15000 V/mm
Length 350 mm Current min/max 60-80A Rules ISO 2560, DIN 1913, UNI 5132 American Welding Society (AWS) A 5.1: E 7016 Tensile strength min. 510 N/mm2 Tenacity to min on test with V cut 80 J Current min 60 A Max current 80 A Longitudinal extension min 28 %
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Content 150 ml Weight content 92 g Chemical base Ammonia chloride Colour Color Density 1 g/cm3 Production storage time 36 months Max working temperature 50 °C Maximum temperature conditions 50 °C Temperature resistance max 50 °C
Container Morning Weight content 450 g Temperature resistance min/max -20 to 100 °C Silicone Yes
Dry lubrication, does not attract dust and dirt Chemical base:Polytetrafluoroethylene Color:White transparent milk (protection film) Density: 0.6 g/cm3 Odore/profume:Characteristic Temperature conditions min: -180 °C Temperature conditions max: 260 °C Boiling point:-44 °C VOC concentration (CH): 588.66 g/l
Content 1 Product weight (per piece) 1066,250 g Container Tanics Chemical base Detergent based on surfactants in aqueous solution Odore/profuse Characteristic Colour White milk Conditions for density 1 g/cm3 / 20°C Mixing ratio 25 ml for 10 l of water Conditions for shelf life from production 24 Months...
WURTH DETERGENT FOR WORKING INDUSTRY OTHER POWER CONTENT 3L ART 08901250
Wire diameter (Ø) 3,25 mm Length 450 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Content 500 ml Weight content 570 g Container Bottle spray Chemical base Phosphoric acid, non-ionic surfactants Odore/profuse Characteristic Colour Color Conditions for pH value 1 / 20°C Point of flammability min 38 °C Conditions for density 1,14 g/cm3 / 20°C Production storage time 24 months...
Voltage range min/max CA 150-250 V/CA Cutting width 3 mm Blade length 60 mm Length 146 mm With clip and tip of the cut screwdriver According to DIN 57680, Part 6 and VDE 0680/6
Measures PHH Handle material Multicomponent plastic Handle length (B) 62 mm Blade length (A) 25 mm Length 87 mm
Content 400 ml Odore/profuse Characteristic Chemical base Aliphatic hydrocarbons Density 0,825 g/cm3 Point of flammability min 62 °C
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Area of application For the gluing of mirrors (also on vertical surfaces).Ideal for furniture, sanitary ware, wood and glass. Instructions When applying the material, make sure the working environment is clean.It is essential to use the product with the components of the Würth system supplied to ensure a correct and impeccable work.
Weight content 40 g Colour Red Odore/profuse Characteristic Temperature resistance max 80 °C PH value Slightly acidic Density 1,1 g/cm3 Density conditions at 20°C Hydrosoluble No Viscosity/consistency Pastry Viscosity 10000 mPas Conditions for viscosity at 20°C
Content 5 Production storage time 36 months Container Plastic sleeve
Content 200 ml Product weight (per piece) 242 g Colour White Production storage time 24 months
Content 400 ml Container Bomboletta aerosol Colour Light Brown Odore/profuse Perfume Chemical base Mineral oil Production storage time 18 months Density 0,889 g/cm3 Without acids Yes Without chlorine Yes Point of flammability min 190 °C Silicone Yes Without resin Yes Contains...
Colour Blue Width 19 mm Length 25 m Thickness 0.15
Main light luminous flux 100 lm Bright side light flow 15 lm Autonomy Lamp 3 h Duration of secondary light 24 h Charging time 2.5 h Protection class IP, lamp IP 20 IP protection type charger IP 20 Impact resistance IK07 Lamp protection class Protection class III/low voltage safety protection...
Chemical base Mineral oil Colour Light Brown Odore/profuse Perfume Density 0,71 g/cm3 Silicone Yes Without acids Yes Without resin Yes Content 50 ml Container Aerosol vent in display box Production storage time 24 months
Area of application Car/cargo To eliminate damage due to paint, scratches and to close existing pores and irregular areas in the universal filling area. Metal Extremely fine surface treatment to ensure optimum finishing. Wood Ideal as a fine or universal stucco for all types of wood.Not suitable for oily wood types.Do not use on very ruined surfaces....
Medical device class - 93/42/EEC IIa MEDICAL PROVISIONS Ministry of Health Identified Registration BD/RDM: 1951667/R Type CND V030102
Chemical base Poliisobutilene Colour Black Odore/profuse Characteristic Temperature resistance min/max -30 to 100 °C Resistance against WaterAlkaline water Point of flammability min -25 °C
Content 500 ml Weight content 460 g Chemical base Ethanol Odore/profuse Citro Colour Blue PH value 7.8 Conditions for PH value at 20°C Point of flammability min 21 °C Density 0,952 g/cm3 Density conditions at 20°C Production storage time 36 months Without AOX Yes Silicone Yes...
Chemical base Mineral oil Basic oil Synthetic hydrocarbons Colour Transparent Odore/profuse Characteristic Density 0,86 g/cm3 Temperature conditions min -20 °C Maximum temperature conditions 200 °C Point of flammability min 240 °C Flammability Point Conditions compliant with DIN ISO 3016 Silicone...
Content 1.255 Weight content 2 kg Colour Beige RAL 1001 Hardness supplement % Density 1.593 g/cm3 Density conditions 20°C, DIN 53217 Max service life 4 min Useful period min 3 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min Max drying time...
Material PE - Polyethylene Colour Yellow-black Width 70 mm Length 200 m
Chemical base |
White oil with additives |
Solid lubricant |
Polytetrafluoroethylene |
Colour |
Transparent |
Density |
0,739 g/cm3 |
Odore/profuse |
Characteristic |
Point of flammability min |
-80 °C |
Silicone |
Yes |
Without acids |
Yes |
Without resin |
Yes |
Without AOX |
Yes |
VOC concentration (CH) |
89.56 % |
Content |
300 ml |
Container |
Bomboletta aerosol |
Production storage time |
24 M |