

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Content |
500 ml |
Container |
Bottle |
Odore/profuse |
Perfume |
Colour |
Green |
Chemical base |
Water with surfactants |
PH value |
7,5 |
Conditions for density |
1,036 g/cm3 / 20°C |
Point of flammability min |
100 °C |
Biodegradable |
Yes |
Without AOX |
Yes |
Silicone |
Yes |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
For quick and accurate cleaning of all surfaces within a vehicle that can be cleaned with a damp cloth.Respect the environment Reduction and prevention of risks for people and the environment thanks to the reduction of packaging waste and greater biodegradability Ecolabel European recognition guarantees the highest quality and environmental compatibility of the product Accurate Easy removal of nicotine and dirt stains caused by shoe prints and dirt coming from the road.Delicate on materials It is compatible with almost all internal materials thanks to the absence of solvents or aggressive chemicals.Indication First, eliminate the most stubborn dirt.Do not use the detergent on hot surfaces or direct sunlight.Instructions for use are test-based recommendations we have made and our experience;perform appropriate tests before each application.Due to the large number of applications and storage and usage conditions possible, all liability is declined for the result of specific applications.To the extent that our free customer service provides technical information or acts as an advisory service, it disclaims any liability, except where the advice or information provided falls within the scope of the contracted specified service or the consultant deliberately act.We guarantee a consistent quality of our products.We reserve the right to make technical changes and further develop products.
Support material PE film Colour Black Length 10 m Width 50 mm Overall thickness 1.5 mm Working temperature min/max 5 to 40 °C Temperature resistance min/max -30 to 80 °C
Content 400 ml Colour Dark Grey Drying time 20 min VOC concentration (CH) 742,8 g/l Production storage time 60 months
Chemical base Polydimethylselose Colour Transparent, translucent, matt Content 500 ml
Content 5000 ml Colour White
Content 0.4 l Chemical base Mineral oil Colour Transparent light yellow Working temperature min/max for tank -10 to 40 °C Operating temperature min/max -30 to 130 °C Production storage time 24 months Min working temperature for tank -10 °C Type of spraying head Standard spray head Max treatment...
Measures PHHY Handle material Multicomponent plastic Handle length (B) 106 mm Blade length (A) 100 mm Length 206 mm
Line Thickness 1.5 mm Colour BLUE Version Permanent waterproof Shape tip Round table
Content 0.4 l Container Spray bottle Temperature conditions min -10 °C Maximum temperature conditions 140 °C Type of spraying head Cobra nozzle Production storage time 24 months
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Grey Medium Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working temperature min...
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Transparent Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity...
Content 1 Weight content 1,02 kg Container Bottle spray Chemical base Alkaline surfactants Odore/profuse Fruit Colour Rose Conditions for pH value 10 / not diluted Conditions for density 1,14 g/cm3 / 20°C Production storage time 12 months Without AOX Yes Silicone Yes Biodegradable...
Colour White Chemical base Polyvinyl acetate dispersion Container Bottle Weight content 500 g Conditions for density 1,1 g/cm3 / 23°C PH value 3 +/- 0.5 Min/max compression pressure 0,4-2N/mm2 Relative humidity wood min/max 8-12 % Min/max application quantity for mounting 150-300 g/m2
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Content 1.255 Weight content 2 kg Colour Beige RAL 1001 Hardness supplement % Density 1.593 g/cm3 Density conditions 20°C, DIN 53217 Max service life 4 min Useful period min 3 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min Max drying time...
Colour Dark grey Odore/profuse Characteristic Temperature resistance min/max -30 to 100 °C Max temporary thermal resistance 150 °C Resistance against Water Conditions for shelf life from production 24 Months Removable/removable Additional, necessary preliminary test
Weight content 960 g Content 750 ml Chemical base Alkyd resin Colour Red Brown Brown Drying time 16 h Density 1,4 g/cm3 Density conditions at 20°C Production storage time 12 months Storage conditions from production from 10°C to 35°C, away from heat sources and light so
Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Colour Beige clear Hardness supplement % Density 1.592 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C Conditions for drying time at 20°C Drying time min 20 min...
Container Bottle Weight content 500 g Colour WhiteTransparent Chemical base Polyvinyl acetate dispersion PH value 6.25 +/- 0.25 Viscosity 13500 mPas Conditions for viscosity to 23°C Density 1,08 kg/l Min film formation temperature 0 °C Production storage time 12 months Relative humidity wood...
Content 500 ml Weight content 460 g Chemical base Ethanol Odore/profuse Citro Colour Blue PH value 7.8 Conditions for PH value at 20°C Point of flammability min 21 °C Density 0,952 g/cm3 Density conditions at 20°C Production storage time 36 months Without AOX Yes Silicone Yes...
Content 50 ml Chemical base Two-component polyurethane Working time 1.5 min Colour Black Density 1.225 g/cm3 Resistance to touch min. 10 min Filming time min 5 min Levigabile after 10 min Working temperature min/max 15 to 25 °C Temperature resistance min/max -30 to 100 °C Silicone Yes
Content 200 ml Colour Red Odore/profuse Characteristic Chemical base Mineral oil Production storage time 24 months Silicone No Density 0,76 g/cm3
Content 400 ml Container Bomboletta aerosol Colour Light Brown Odore/profuse Perfume Chemical base Mineral oil Production storage time 18 months Density 0,889 g/cm3 Without acids Yes Without chlorine Yes Point of flammability min 190 °C Silicone Yes Without resin Yes Contains...
Content 300 ml Colour Light yellow Odore/profuse Characteristic Production storage time 24 months Chemical base Mineral oil Density 0,743 g/cm3 Density conditions at 20°C
Line Thickness 1 mm Colour Black Version Permanent waterproof Shape tip Round table Carcase material Plastic Silicone No
Chemical base White oil with additives Solid lubricant Polytetrafluoroethylene Colour Transparent Density 0,739 g/cm3 Odore/profuse Characteristic Point of flammability min -80 °C Silicone Yes Without acids Yes Without resin Yes Without AOX Yes VOC concentration (CH) 89.56 % Content...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,09 g/cm3 Viscosity min/max 1800-2200 mPas Conditions for hardening time min/max 10-60 s / Based on material Conditions for voltage resistance min/max 12-25 N/mm2 / according to DIN 53288 Tensile strength min./max. 12-25 N/mm2 Tension and...
Wire diameter (Ø) 2.5 mm Length 300 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Colour White Tensile strength min. 500 MPa Longitudinal extension min 2
Chemical base Silicate sodium Content 310 ml Density 1.8 g/cm3 Colour Black Complete vulcanization speed 5 mm/g Temperature resistance min/max -20 to 1100 °C Working temperature min/max 5 to 35 °C Production storage time 12 months Storage conditions from production storage in a cool and dry place, from...
Content 200 ml Colour Color Chemical base Tetrafluoropropane Production storage time 36 months Density 1,18 g/ml Density conditions at 20°C
Boiling point 110 °C Product weight (per piece) 1167,056 g Colour Blue Chemical base Ethylene glycol Content 1
Hardness supplement % Chemical base Fiberglass Colour White Width 80 cm Weight per m2 300 g Useful duration min/max 10-15 min Conditions for duration at 20°C Drying time min 60 min Conditions for drying time at 20°C Temperature resistance max hardened material 80 °C Production storage time...
Air current 74 l/s Depression 23 kPa Container content 30 l Max power 1380 W Cable length 7.5 m Fitting diameter for hose 35 mm Frequency min/max 50 / 60 Hz Acoustic pressure level 70 dB IP protection class IP X4 Length 540 mm Width 370 mm Height 560 mm
Content 1 Product weight (per piece) 1122,444 g Container Bottle Biodegradable 90%
Content 400 ml Odore/profuse Characteristic Chemical base Aliphatic hydrocarbons Density 0,825 g/cm3 Point of flammability min 62 °C
Content 0.4 l Colour Color Chemical base Synthetic oil physiologically harmless Conditions for density 0,785 g/cm3 / Active ingredient, 20°C Operating temperature min/max -50 to 250 °C Production storage time 24 months
Content 400 ml Chemical base Epoxy resin Colour White grey Drying time 25 min Density 0,83 g/cm3 VOC concentration (CH) 83.5 % Production storage time 24 months
Wire diameter (Ø) 3,25 mm Length 450 mm American Welding Society (AWS) A 5.1: AND 7018 Coating Basic Tensile strength min. 500 MPa Longitudinal extension min 20 %
Container Morning Weight content 450 g Temperature resistance min/max -20 to 100 °C Silicone Yes
Height (C) 245 mm Width (A) 560 mm Depth (B) 430 mm Material PE - Polyethylene Product weight (per piece) 8
Support material Poliisobutilene Colour Black (basic material) Width 19 mm Working temperature min/max 5 to 35 °C Breaking extension 600 % Temperature resistance min/max -40 to 90 °C UV resistance Limited Moisturizer Yes Length 10 m Overall thickness 0.5 mm Dielectric resistance 40 kV/mm...
Measures PHHY Handle material Multicomponent plastic Handle length (B) 114 mm Blade length (A) 150 mm Length 264 mm
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
WURTH DETERGENT AND BRILLANT FOR LAVABICCHIERI PRODUCTS ALCALINITY CONTENT 6 KG ART. 08931604
Length 100 mm Diameter 2,8 mm Thickness line min/max 0.5-2.8 mm Colour Grey
Medical device class - 93/42/EEC IIa MEDICAL PROVISIONS Ministry of Health Identified Registration BD/RDM: 1951667/R Type CND V030102
Content 150 ml Colour Color Chemical base Propane Conditions for density 0,69 g/cm3 / 20°C Production storage time 24 months
Content |
500 ml |
Container |
Bottle |
Odore/profuse |
Perfume |
Colour |
Green |
Chemical base |
Water with surfactants |
PH value |
7,5 |
Conditions for density |
1,036 g/cm3 / 20°C |
Point of flammability min |
100 °C |
Biodegradable |
Yes |
Without AOX |
Yes |
Silicone |
Yes |