

Reference: D571053
IT IS THE MOST IMPORTANT THING TO DO IT’S A GOOD THING TO DO M4 30X12
Banner
Boiling point |
110 °C |
Product weight (per piece) |
1167,056 g |
Colour |
Blue |
Chemical base |
Ethylene glycol |
Content |
1 |
Secure site in SSL certification for the security of your data
Shipping in 24/48 hours after payment
Maximum times for returns 14 days, the goods must return as shipped by us,
Permanent antifreeze for the protection of the cooling system Protective fluid Refrigerant/anti-freezing -40°C Protects the motor, radiator and water pump from corrosion and frost throughout the year boiling point +110°C Anti-corrosion Protects the radiator and the engine from frost Compatible with all steel elements, grey cast iron, aluminum, copper, brassThe technical advice given, although based on our best experience, is to be considered, in any case, purely indicative and must be confirmed by exhaustive practical tests.They therefore do not dispense the buyer from his own responsibility to personally try our products with regard to their suitability for the intended use
Number of pieces in the assortment/kit 29 PZ
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Transparent Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity...
Number of pieces in the assortment/kit 8 PZ Key opening 6 x 7 mm8 x 9 mm10 x 11 mm12 x 13 mm14 x 15 mm16 x 17 mm18 x 19 mm20 x 22 mm Product weight (per piece) 1206
Content 5000 ml Colour White
Content 590 ml Odore/profuse Characteristic Weight content 970 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracites Hardness supplement % Density 1,858 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Blade width 18 mm Length 170 mm
Height (C) 210 mm Width (A) 465 mm Depth (B) 390 mm Material PE - Polyethylene Product weight (per piece) 5200 g
Material PE - Polyethylene Colour Red/white Width 70 mm Length 200 m
Content 500 ml Weight content 570 g Container Bottle spray Chemical base Phosphoric acid, non-ionic surfactants Odore/profuse Characteristic Colour Color Conditions for pH value 1 / 20°C Point of flammability min 38 °C Conditions for density 1,14 g/cm3 / 20°C Production storage time 24 months...
Chemical base Exterior of cyanacrylate acid Colour Transparent Density 1,06 g/cm3 Conditions for hardening time min/max 5-90 s / Based on material Tension and cut resistance combined min 8N/mm2 Elastic power % Max bonding slot size 0.1 mm Temperature resistance min/max -30 to +80 °C Working temperature...
Roll width 19 mm Roll length 3 m Thickness 0.5 mm Temperature resistance min/max -40 to 150 °C Max temporary thermal resistance 200 °C Breaking extension 800 %
inmate 1282.1 Odore/profuse Characteristic Weight content 1760 g Conditions for concentration VOC ChemVOCFarb Chemical base Polyester Resin Colour Anthracite, metallic Hardness supplement % Density 1,404 g/cm3 Max service life 5 min Useful period min 4 min Conditions for duration at 20°C...
Content 50 ml Chemical base Two-component polyurethane Working time 3.5 min Colour Black Density 1.225 g/cm3 Resistance to touch min. 30 min Filming time min 15 min Levigabile after 30 min Working temperature min/max 15 to 25 °C Temperature resistance min/max -30 to 100 °C Silicone Yes
Weight content 1000 g Operating temperature min/max -30 to 130 °C Colour Yellow Conditions for viscosity oil base cinema 122 mm2/s / at 40°C Production storage time 24 months Basic oil Mineral oil Odore/profuse Characteristic Density 1 g/cm3 Basic oil viscosity conditions at 40°C Temperature...
Working temperature min -10 °C Max working temperature 50 °C Production storage time 36 months
Content 400 ml Colour Light grey (light gray) Drying time 20 min VOC concentration (CH) 742,8 g/l Production storage time 60 months
Content 400 ml Odore/profuse Characteristic Chemical base Aliphatic hydrocarbons Density 0,825 g/cm3 Point of flammability min 62 °C
Support material Silicone Colour Black Width 25 mm Working temperature min/max -50 to 260 °C Breaking extension 300 % Temperature resistance min/max -60 to 260 °C UV resistance Yes Moisturizer Yes Length 3,65 m Overall thickness 0.5 mm Dielectric resistance 15000 V/mm
Boiling point 110 °C Product weight (per piece) 5864 g Colour Green Chemical base Ethylene glycol Content 5
Chemical base Polydimethylselose Colour Transparent, translucent, matt Content 500 ml
Content 400 ml Chemical base Nitro alchid Colour Zinc, clear Vulcanization time min 1 h Complete hardening/vulcanization conditions 20°C Volcanic time max 1 h Resistance to saline fog test 500 h Temperature resistance max 200 °C Time out of dust 10 min Dry layer thickness (first longitudinal...
Measures PHY Handle material Multicomponent plastic Handle length (B) 120 mm Blade length (A) 200 mm Length 320 mm
Wire diameter (Ø) 2 mm Length 300 mm American Welding Society (AWS) A 5.1: E 6013 Coating Ruty Colour Green Tensile strength min. 500 MPa Longitudinal extension min 20 %
Content 200 ml Colour Red Odore/profuse Characteristic Chemical base Mineral oil Production storage time 24 months Silicone No Density 0,76 g/cm3
Length 140 mm Max cable diameter cutting capacity on aluminium/blade 10 mm Cutting capacity with cross section aluminum wire / max blade 35 mm2 Material Stainless steel Handle material Multicomponent plastic Product weight (per piece) 72 g
Content 310 ml Chemical base Siliconi Sauer (acetate systems) Colour Brown Maximum working time 25 % Shore hardness A 20 Working temperature min/max 5 to 40 °C Temperature resistance min/max -50 to 200 °C Filming time min 20 min Conditions for filming time to 23°C and 50% relative humidity Min...
Area of application Suitable for all types of surfaces such as:handles, handles, keyboards, tablets, cellphones, coins, steering wheel, gearbox, dashboards, hats, flat surfaces, shoes and glove It can also be used to hygienize the outside of the masks.In this case, it is recommended not to use the treated mask for a period of at least 5 hours
Content 1 Production storage time 36 months Container Plastic bottle
Measures PHHY Handle material Multicomponent plastic Handle length (B) 114 mm Blade length (A) 150 mm Length 264 mm
Chemical base Hydrocarbon Basic oil Synthetic mineral oil Colour Yellowish Odore/profuse Oil Density 0,742 g/cm3 Density conditions at 20°C Temperature conditions min -25 °C Maximum temperature conditions 180 °C Max temporary thermal resistance 200 °C Inflamability point of the active ingredient...
Number of pieces in the assortment/kit 7 Version Without head
Measures PHH Handle material Multicomponent plastic Handle length (B) 62 mm Blade length (A) 25 mm Length 87 mm
Air current 74 l/s Depression 23 kPa Container content 30 l Max power 1380 W Cable length 7.5 m Fitting diameter for hose 35 mm Frequency min/max 50 / 60 Hz Acoustic pressure level 70 dB IP protection class IP X4 Length 540 mm Width 370 mm Height 560 mm
Weight content 360 g Content 400 ml Chemical base Acrylic Nitro Colour Light grey (light gray) Drying time 30 min Conditions for drying time at 20°C Evaporation time min 2 min Max working temperature 30 °C Density 0,9 g/l Density conditions at 20°C VOC concentration (CH) 79 Working...
Length 160 mm Cutting capacity with cross section aluminum wire / max blade 50 mm Material AISI 420 stainless steel Handle material 2 component plastic Product weight (per piece) 122 g
Content 0.4 l Container Spray bottle Temperature conditions min -10 °C Maximum temperature conditions 140 °C Type of spraying head Cobra nozzle Production storage time 24 months
Content 300 ml Container Bomboletta aerosol Type of spraying head Cobra nozzle Production storage time 24 months
Number of pieces in the assortment/kit 5
Adhesive base Acrylic Support material Polyethylene foam Colour White Thickness 1 mm Breaking extension 150 % Adhesive force 25 mm 23N Temperature resistance min -40 °C Temperature resistance min/max -40 to 95 °C Max working temperature 40 °C Working temperature min/max 5 to 40 °C...
Chemical base Synthetic rubber Colour Transparent Density 0,85 g/ml Odore/profuse Characteristic Working temperature min/max 0 to 30 °C Temperature resistance min/max -20 to 110 °C Point of flammability min -24 °C Min/max evaporation time 5 min-15 min Distance delivery min/max 15-25 cm Content...
Content 500 ml Temperature conditions min -30 °C Maximum temperature conditions 450 °C Inflamability point of the active ingredient 70 °C
Boiling point 110 °C Product weight (per piece) 1166,333 g Colour ViolaRossiccio Chemical base Ethylene glycol Content 1
Rated voltage 12 V/CC Battery type/rechargeable battery Alm
Content 1000 ml Odore/profuse Grade Colour BeigeAmber Viscosity/consistency Creamy Conditions for pH value 9.7 / 20°C
Container Double card Chemical base Epoxy resin Colour Black Density 1,1 g/cm3 Odore/profuse Characteristic Tension resistance min 30 N/mm2 Tension and cut resistance combined min 1.7 N/mm2 Combined tensile and cut resistance conditions after four hours, 23°C, EN 1465 Conditions for voltage resistance...
Chemical base Cyanoacrylate Colour Transparent Density 1,05 g/cm3 Conditions for hardening time min/max 4-20 s / Based on material Tension resistance min/max 0.1-0,1N/mm2 Elastic power % Working temperature min/max 7 to 40 °C Silicone Yes Without solvents Yes Conditions for shelf life from...
Chemical base Exterior of dimetacrilic acid Colour Fluorescent green Density 1,11 g/cm3 Viscosity min/max 500-900 mPas Conditions for viscosity 25°C, Brookfield RVT, 2/20 rpm Max filling capacity 0.15 mm Point of flammability min 100 °C Min/max initial resistance 5-15 min Final resistance min/max 5...
Boiling point |
110 °C |
Product weight (per piece) |
1167,056 g |
Colour |
Blue |
Chemical base |
Ethylene glycol |
Content |
1 |